lkml.org 
[lkml]   [2017]   [Jun]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v4 5/7] ARM: dts: meson6: switch to new bindings for UART nodes
From
Date
On 06/12/2017 11:42 AM, Jerome Brunet wrote:
> On Fri, 2017-06-09 at 11:49 +0200, Neil Armstrong wrote:
>> Switch to the stable UART bindings by adding a XTAL node and using the
>> proper compatible strings.
>>
>> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
>
> Shouldn't this patch be squashed with patch 4 ?
>

Yep, so it doesn't break bisect.

Neil

>
>> ---
>> arch/arm/boot/dts/meson6.dtsi | 28 ++++++++++++++++++++++++++++
>> 1 file changed, 28 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/meson6.dtsi b/arch/arm/boot/dts/meson6.dtsi
>> index b0fc91f..a334fbe 100644
>> --- a/arch/arm/boot/dts/meson6.dtsi
>> +++ b/arch/arm/boot/dts/meson6.dtsi
>> @@ -70,9 +70,37 @@
>> };
>> };
>>
>> + xtal: xtal-clk {
>> + compatible = "fixed-clock";
>> + clock-frequency = <24000000>;
>> + clock-output-names = "xtal";
>> + #clock-cells = <0>;
>> + };
>> +
>> clk81: clk@0 {
>> #clock-cells = <0>;
>> compatible = "fixed-clock";
>> clock-frequency = <200000000>;
>> };
>> }; /* end of / */
>> +
>> +
>> +&uart_AO {
>> + clocks = <&xtal>, <&clk81>, <&clk81>;
>> + clock-names = "xtal", "pclk", "baud";
>> +};
>> +
>> +&uart_A {
>> + clocks = <&xtal>, <&clk81>, <&clk81>;
>> + clock-names = "xtal", "pclk", "baud";
>> +};
>> +
>> +&uart_B {
>> + clocks = <&xtal>, <&clk81>, <&clk81>;
>> + clock-names = "xtal", "pclk", "baud";
>> +};
>> +
>> +&uart_C {
>> + clocks = <&xtal>, <&clk81>, <&clk81>;
>> + clock-names = "xtal", "pclk", "baud";
>> +};
>

\
 
 \ /
  Last update: 2017-06-12 14:50    [W:0.042 / U:0.148 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site