lkml.org 
[lkml]   [2017]   [Jun]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH 1/2] spi: rockchip: add support for "cs-gpios" dts property
Date
Am Montag, 12. Juni 2017, 17:12:24 CEST schrieb jeffy:
> Hi Heiko,
>
> thanx for your comments.
>
> On 06/12/2017 04:36 PM, Heiko Stübner wrote:
> > Am Montag, 12. Juni 2017, 16:26:07 CEST schrieb jeffy:
> >> Hi Shawn,
> >>
> >> On 06/12/2017 03:15 PM, Shawn Lin wrote:
> >>> Hi Jeffy,
> >>>
> >>> On 2017/6/12 14:14, Jeffy Chen wrote:
> >>>> Support using "cs-gpios" property to specify cs gpios.
> >>>>
> >>>> Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
> >>>> ---
> >>>>
> >>>> .../devicetree/bindings/spi/spi-rockchip.txt | 2 +
> >>>> drivers/spi/spi-rockchip.c | 52
> >>>>
> >>>> ++++++++++++++++++++++
> >>>>
> >>>> 2 files changed, 54 insertions(+)
> >>>>
> >>>> diff --git a/Documentation/devicetree/bindings/spi/spi-rockchip.txt
> >>>> b/Documentation/devicetree/bindings/spi/spi-rockchip.txt
> >>>> index 83da493..02171b2 100644
> >>>> --- a/Documentation/devicetree/bindings/spi/spi-rockchip.txt
> >>>> +++ b/Documentation/devicetree/bindings/spi/spi-rockchip.txt
> >>>
> >>> The changes for doc should be another patch, and...
> >>
> >> but i saw others didn't separate them:
> >> cf9e478 spi: sh-msiof: Add slave mode support
> >> 23e291c spi: rockchip: support "sleep" pin configuration
> >
> > it sometimes falls through the cracks, but having dt-binding patches
> > separate is meant to make it easier on DT-Maintainers to find
> > patches they need to look at.
>
> ok, will do.
>
> >>>> + if (!data->cs_gpio_requested) {
> >>>> + ret = gpio_request_one(spi->cs_gpio, flags,
> >>>> + dev_name(&spi->dev));
> >>>> + if (!ret)
> >>>> + data->cs_gpio_requested = 1;
> >>>> + } else
> >>>> + ret = gpio_direction_output(spi->cs_gpio, flags);
> >>>
> >>> need brace around 'else' statement. Also I don't see data used
> >>> elsewhere, so you need these code above.
> >>
> >> ok.
> >> and the cs_gpio_requested is to mark cs_gpio requested, because the
> >> setup func might be called multiple times, we only need to request gpio
> >> at the first time.
> >
> > Aren't the gpiod* functions meant to be used for new things?
> > Also you might actually do a bit of error handling there, especially
> > EPROBE_DEFER.
>
> so you are suggesting to use gpiod* functions here to replace gpio_*
> functions right?

correct. And handle errors that may get returned, especially EPROBE_DEFER,
but also other errors may indicate that your spi won't function as expected.


Heiko

\
 
 \ /
  Last update: 2017-06-12 11:24    [W:0.080 / U:0.644 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site