lkml.org 
[lkml]   [2017]   [May]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2] x86/efi: Correct ident mapping of efi old_map when kalsr enabled
Thanks for explaining, Bhupesh. 

BIOS issue of SGI uv1 is still not fixed. There's a quirk for uv1 to
use efi old map:

void __init efi_apply_memmap_quirks(void)
{
...
...
/* UV2+ BIOS has a fix for this issue. UV1 still needs the quirk. */
if (dmi_check_system(sgi_uv1_dmi))
set_bit(EFI_OLD_MEMMAP, &efi.flags);
}

And because of some reasons, redhat also need efi old_map now.

Hi Matt,

This v2 patch works on my kvm guest, however there's still problem on
SGI system. I will post v3 later after it's handled. So nack this v2
patch.

Thanks
Baoquan

On 05/08/17 at 12:07am, Bhupesh Sharma wrote:
> On Sat, May 6, 2017 at 5:06 AM, Borislav Petkov <bp@alien8.de> wrote:
> > On Fri, May 05, 2017 at 09:42:14PM +0100, Matt Fleming wrote:
> >> (Including the folks from SGI since this was hit on a UV system)
> >
> > Wasn't there a BIOS fix supplied at some point which obviated the need
> > to boot with efi=old_map on SGI boxes?
> >
>
> AFAICR, the bios fixes were provided only for SGI boxes with BIOS
> version greater than or equal to UV2 (so upstream with recent bios
> works on UV2, UV3, and UV4 hardware platforms, both with old and new
> mapping, with new mapping being the default), however the UV1
> platforms still use efi=old_map
>
> Also as mentioned above since commit
> caef78b6cdeddf4ad364f95910bba6b43b8eb9bf fixed the efi=old_map support
> on UV systems even with new bios, they should ideally all boot up
> properly in upstream both with 'nokaslr' and without 'nokaslr' in the
> bootargs when efi=old_map is used.
>
> Regards,
> Bhupesh

\
 
 \ /
  Last update: 2017-05-08 03:38    [W:2.514 / U:1.160 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site