Messages in this thread | | | Subject | Re: [PATCH v2] iio:ad5064: Add support for ltc2633 and similar devices | From | Jonathan Cameron <> | Date | Sun, 14 May 2017 16:18:17 +0100 |
| |
On 10/05/17 10:12, Lars-Peter Clausen wrote: > On 05/08/2017 09:26 AM, Mike Looijmans wrote: >> The Linear Technology LTC2631, LTC2633 and LTC2635 are very similar >> to the AD5064 device, in particular the LTC2627. >> >> This patch adds support for those devices. Only the LTC2633 has been >> tested, which is the 2-channel variant. The LTC2631 is the 1-channel, >> and the LTC2635 the 4-channel version. The actual DAC resolution depends >> on the exact chip type and can be 12, 10 or 8 bits, using the upper bits >> so this has no effect on the register map. The internal reference is set >> to 2.5V on "L" versions, and it's 4.096V for "H" versions. >> >> Datasheets: >> LTC2631: http://www.linear.com/docs/26553 >> LTC2633: http://www.linear.com/docs/39529 >> LTC2635: http://www.linear.com/docs/28754 >> >> Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl> > > Reviewed-by: Lars-Peter Clausen <lars@metafoo.de> > > Thanks for reworking the patch. > Applied to the togreg branch of iio.git and pushed out as testing for the autobuilders to play with it.
Thanks,
Jonathan
| |