Messages in this thread Patch in this message | | | From | Leonard Crestez <> | Subject | [PATCH v2 4/4] ARM: dts: imx6qp-sabresd: Set reg_arm regulator supply | Date | Tue, 4 Apr 2017 20:04:14 +0300 |
| |
On imx6qp-sabresd LDO_ARM is connected to a different PMIC output than the other imx6qdl-sabresd boards.
Setting cpu0 arm-supply to sw2_reg is wrong, this must have mistakenly slipped out of the vendor tree where this is are used for LDO bypass.
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> --- arch/arm/boot/dts/imx6qp-sabresd.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/imx6qp-sabresd.dts b/arch/arm/boot/dts/imx6qp-sabresd.dts index b234580..a8a5004 100644 --- a/arch/arm/boot/dts/imx6qp-sabresd.dts +++ b/arch/arm/boot/dts/imx6qp-sabresd.dts @@ -50,8 +50,8 @@ compatible = "fsl,imx6qp-sabresd", "fsl,imx6qp"; }; -&cpu0 { - arm-supply = <&sw2_reg>; +®_arm { + vin-supply = <&sw2_reg>; }; &iomuxc { -- 2.7.4
| |