lkml.org 
[lkml]   [2017]   [Apr]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 5/5] ARM: dts: imx6qp-sabresd: Set reg_arm regulator supply
From
Date
Am Freitag, den 31.03.2017, 22:25 +0300 schrieb Leonard Crestez:
> On imx6qp-sabresd LDO_ARM is connected to a different PMIC output than
> the other imx6qdl-sabresd boards.
>
> Setting cpu0 arm-supply to sw2_reg is wrong, this must have mistakenly
> slipped out of the vendor tree where this is are used for LDO bypass.
>
> Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>

Reviewed-by: Lucas Stach <l.stach@pengutronix.de>

> ---
> arch/arm/boot/dts/imx6qp-sabresd.dts | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm/boot/dts/imx6qp-sabresd.dts b/arch/arm/boot/dts/imx6qp-sabresd.dts
> index b234580..a8a5004 100644
> --- a/arch/arm/boot/dts/imx6qp-sabresd.dts
> +++ b/arch/arm/boot/dts/imx6qp-sabresd.dts
> @@ -50,8 +50,8 @@
> compatible = "fsl,imx6qp-sabresd", "fsl,imx6qp";
> };
>
> -&cpu0 {
> - arm-supply = <&sw2_reg>;
> +&reg_arm {
> + vin-supply = <&sw2_reg>;
> };
>
> &iomuxc {


\
 
 \ /
  Last update: 2017-04-04 13:03    [W:0.708 / U:0.036 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site