lkml.org 
[lkml]   [2017]   [Apr]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2] usb: dwc3: add disable u2mac linestate check quirk
From
Date
Dear Guenter,

在 2017年04月19日 13:15, Guenter Roeck 写道:
> On Tue, Apr 18, 2017 at 8:59 PM, wlf <wulf@rock-chips.com> wrote:
>> Dear Guenter,
>>
>>
>>
>> 在 2017年04月18日 21:18, Guenter Roeck 写道:
>>> On Mon, Apr 17, 2017 at 10:17 PM, William Wu <william.wu@rock-chips.com>
>>> wrote:
>>>> This patch adds a quirk to disable USB 2.0 MAC linestate check
>>>> during HS transmit. Refer the dwc3 databook, we can use it for
>>>> some special platforms if the linestate not reflect the expected
>>>> line state(J) during transmission.
>>>>
>>>> When use this quirk, the controller implements a fixed 40-bit
>>>> TxEndDelay after the packet is given on UTMI and ignores the
>>>> linestate during the transmit of a token (during token-to-token
>>>> and token-to-data IPGAP).
>>>>
>>>> On some rockchip platforms (e.g. rk3399), it requires to disable
>>>> the u2mac linestate check to decrease the SSPLIT token to SETUP
>>>> token inter-packet delay from 566ns to 466ns, and fix the issue
>>>> that FS/LS devices not recognized if inserted through USB 3.0 HUB.
>>>>
>>>> Signed-off-by: William Wu <william.wu@rock-chips.com>
>>>> ---
>>>> Changes in v2:
>>>> - fix coding style
>>>>
>>>> Documentation/devicetree/bindings/usb/dwc3.txt | 2 ++
>>>> drivers/usb/dwc3/core.c | 14 ++++++++++----
>>>> drivers/usb/dwc3/core.h | 4 ++++
>>>> 3 files changed, 16 insertions(+), 4 deletions(-)
>>>>
>>>> diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt
>>>> b/Documentation/devicetree/bindings/usb/dwc3.txt
>>>> index f658f39..6a89f0c 100644
>>>> --- a/Documentation/devicetree/bindings/usb/dwc3.txt
>>>> +++ b/Documentation/devicetree/bindings/usb/dwc3.txt
>>>> @@ -45,6 +45,8 @@ Optional properties:
>>>> a free-running PHY clock.
>>>> - snps,dis-del-phy-power-chg-quirk: when set core will change PHY
>>>> power
>>>> from P0 to P1/P2/P3 without delay.
>>>> + - snps,tx-ipgap-linecheck-dis-quirk: when set, disable u2mac linestate
>>>> check
>>>> + during HS transmit.
>>> All other disable-something quirks are named
>>> "snps,dis-something-quirk". Maybe use the same naming convention ?
>> Yes, good idea! I will fix it with "snps,dis-tx-ipgap-linecheck-quirk" in
>> next patch verison.
>> Thanks:-)
>>>
>>>> - snps,is-utmi-l1-suspend: true when DWC3 asserts output signal
>>>> utmi_l1_suspend_n, false when asserts
>>>> utmi_sleep_n
>>>> - snps,hird-threshold: HIRD threshold
>>>> diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
>>>> index 455d89a..03429c5 100644
>>>> --- a/drivers/usb/dwc3/core.c
>>>> +++ b/drivers/usb/dwc3/core.c
>>>> @@ -796,15 +796,19 @@ static int dwc3_core_init(struct dwc3 *dwc)
>>>> dwc3_writel(dwc->regs, DWC3_GUCTL2, reg);
>>>> }
>>>>
>>>> + reg = dwc3_readl(dwc->regs, DWC3_GUCTL1);
>>>> +
>>> My understanding is that the register was only introduced with dwc3
>>> revision 2.50a. Is it ok to read and write it unconditionally ?
>> Yes, refer to dwc3 databook, the DWC3_GUCTL1 was introduced since 2.50a.
>> Maybe it's better
>> to read and write it only when we know our controller version.
>>
>> Is it good to fix it like the following patch?
>> But this patch has a problem that we need to read and write the register
>> twice if our controller verison > = 2.90a, and need this quirk.
>>
>> --- a/drivers/usb/dwc3/core.c
>> +++ b/drivers/usb/dwc3/core.c
>> @@ -806,6 +806,12 @@ static int dwc3_core_init(struct dwc3 *dwc)
>> dwc3_writel(dwc->regs, DWC3_GUCTL1, reg);
>> }
>>
>> + if (dwc->dis_tx_ipgap_linecheck_quirk) {
>> + reg = dwc3_readl(dwc->regs, DWC3_GUCTL1);
>> + reg |= DWC3_GUCTL1_TX_IPGAP_LINECHECK_DIS;
>> + dwc3_writel(dwc->regs, DWC3_GUCTL1, reg);
>> + }
>> +
>>
> How about this ?
>
> if (dwc->revision >= DWC3_REVISION_250A) {
> reg = dwc3_readl(dwc->regs, DWC3_GUCTL1);
> if (dwc->revision >= DWC3_REVISION_290A)
> reg |= DWC3_GUCTL1_DEV_L1_EXIT_BY_HW;
> if (dwc->dis_tx_ipgap_linecheck_quirk)
> reg |= DWC3_GUCTL1_TX_IPGAP_LINECHECK_DIS;
> dwc3_writel(dwc->regs, DWC3_GUCTL1, reg);
> }
>
> Thanks,
> Guenter
Thanks, looks good to me. I will fix it in patch v2.
>
>> Hi John & Felipe,
>> Could you provide me some suggestion?
>> Thank you!
>>
>>>> /*
>>>> * Enable hardware control of sending remote wakeup in HS when
>>>> * the device is in the L1 state.
>>>> */
>>>> - if (dwc->revision >= DWC3_REVISION_290A) {
>>>> - reg = dwc3_readl(dwc->regs, DWC3_GUCTL1);
>>>> + if (dwc->revision >= DWC3_REVISION_290A)
>>>> reg |= DWC3_GUCTL1_DEV_L1_EXIT_BY_HW;
>>>> - dwc3_writel(dwc->regs, DWC3_GUCTL1, reg);
>>>> - }
>>>> +
>>>> + if (dwc->tx_ipgap_linecheck_dis_quirk)
>>>> + reg |= DWC3_GUCTL1_TX_IPGAP_LINECHECK_DIS;
>>>> +
>>>> + dwc3_writel(dwc->regs, DWC3_GUCTL1, reg);
>>>>
>>>> return 0;
>>>>
>>>> @@ -1023,6 +1027,8 @@ static void dwc3_get_properties(struct dwc3 *dwc)
>>>> "snps,dis-u2-freeclk-exists-quirk");
>>>> dwc->dis_del_phy_power_chg_quirk =
>>>> device_property_read_bool(dev,
>>>> "snps,dis-del-phy-power-chg-quirk");
>>>> + dwc->tx_ipgap_linecheck_dis_quirk =
>>>> device_property_read_bool(dev,
>>>> + "snps,tx-ipgap-linecheck-dis-quirk");
>>>>
>>>> dwc->tx_de_emphasis_quirk = device_property_read_bool(dev,
>>>> "snps,tx_de_emphasis_quirk");
>>>> diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
>>>> index 981c77f..3c2537b 100644
>>>> --- a/drivers/usb/dwc3/core.h
>>>> +++ b/drivers/usb/dwc3/core.h
>>>> @@ -204,6 +204,7 @@
>>>> #define DWC3_GCTL_DSBLCLKGTNG BIT(0)
>>>>
>>>> /* Global User Control 1 Register */
>>>> +#define DWC3_GUCTL1_TX_IPGAP_LINECHECK_DIS BIT(28)
>>>> #define DWC3_GUCTL1_DEV_L1_EXIT_BY_HW BIT(24)
>>>>
>>>> /* Global USB2 PHY Configuration Register */
>>>> @@ -850,6 +851,8 @@ struct dwc3_scratchpad_array {
>>>> * provide a free-running PHY clock.
>>>> * @dis_del_phy_power_chg_quirk: set if we disable delay phy power
>>>> * change quirk.
>>>> + * @tx_ipgap_linecheck_dis_quirk: set if we disable u2mac linestate
>>>> + * check during HS transmit.
>>>> * @tx_de_emphasis_quirk: set if we enable Tx de-emphasis quirk
>>>> * @tx_de_emphasis: Tx de-emphasis value
>>>> * 0 - -6dB de-emphasis
>>>> @@ -1004,6 +1007,7 @@ struct dwc3 {
>>>> unsigned dis_rxdet_inp3_quirk:1;
>>>> unsigned dis_u2_freeclk_exists_quirk:1;
>>>> unsigned dis_del_phy_power_chg_quirk:1;
>>>> + unsigned tx_ipgap_linecheck_dis_quirk:1;
>>>>
>>>> unsigned tx_de_emphasis_quirk:1;
>>>> unsigned tx_de_emphasis:2;
>>>> --
>>>> 2.0.0
>>>>
>>>>
>>>
>>
>
>


\
 
 \ /
  Last update: 2017-04-19 13:33    [W:0.065 / U:0.140 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site