lkml.org 
[lkml]   [2017]   [Mar]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v4 0/5] ARM: K2G: Add support for TI-SCI Generic PM Domains
Date
Hi,
This is v4 of the series to add support for TI-SCI Generic PM Domains.
Previous versions can be found here:

v3: https://www.spinics.net/lists/kernel/msg2413975.html
v2: https://www.spinics.net/lists/kernel/msg2364612.html
v1: http://www.spinics.net/lists/arm-kernel/msg525204.html

After much debate I have returned to using the phandle cell to pass the SCI ID
rather than the separate "ti,sci-id" property that was not very popular. In
order to do this I needed to make a change to the genpd framework which can be
seen in patch 2 and should benefit others that have client . Rather than
checking for zero phandle args and failing if any are present the
of_genpd_add_provider_simple call does not check at all and instead leaves
parsing and interpretation up to the platform genpd driver.

This allows the ti_sci_pm_domains driver to parse the phandle and use the first
phandle cell as the sci-id rather than getting it from a separate property.

Besides that none of the original patches have changed apart from updating the
year to 2017 in patches 3 and 4 and of course a small update to patch 4 to let
the ti_sci_pm_domains parse the phandle and extract the sci-id rather than
looking for the rejected ti,sci-id property.

I did not update the "power-domain" binding document because in regards to
#power-domain-cells it already states "can be any value as specified by device
tree binding documentation of particular provider" which I think already
describes the change in patch 2.

Regards,
Dave

Dave Gerlach (5):
PM / Domains: Add generic data pointer to genpd data struct
PM / Domains: Do not check if simple providers have phandle cells
dt-bindings: Add TI SCI PM Domains
soc: ti: Add ti_sci_pm_domains driver
ARM: keystone: Drop PM domain support for k2g

.../devicetree/bindings/soc/ti/sci-pm-domain.txt | 59 ++++++
MAINTAINERS | 3 +
arch/arm/mach-keystone/Kconfig | 1 +
arch/arm/mach-keystone/pm_domain.c | 4 +-
drivers/base/power/domain.c | 2 -
drivers/soc/ti/Kconfig | 12 ++
drivers/soc/ti/Makefile | 1 +
drivers/soc/ti/ti_sci_pm_domains.c | 202 +++++++++++++++++++++
include/dt-bindings/genpd/k2g.h | 90 +++++++++
include/linux/pm_domain.h | 1 +
10 files changed, 372 insertions(+), 3 deletions(-)
create mode 100644 Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt
create mode 100644 drivers/soc/ti/ti_sci_pm_domains.c
create mode 100644 include/dt-bindings/genpd/k2g.h

--
2.11.0

\
 
 \ /
  Last update: 2017-03-07 12:57    [W:0.215 / U:2.736 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site