lkml.org 
[lkml]   [2017]   [Mar]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] reset: sunxi: fix for 64-bit compilation
Date
The Allwinner reset controller has 32-bit registers, so translating
the reset cell number into a register and bit offset should not use
any architecture dependent data size. Otherwise this breaks for 64-bit
architectures like arm64.
Fix this by making it clear that it's the hardware register width which
matters here in the calculation.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
---
drivers/reset/reset-sunxi.c | 18 ++++++++++--------
1 file changed, 10 insertions(+), 8 deletions(-)

diff --git a/drivers/reset/reset-sunxi.c b/drivers/reset/reset-sunxi.c
index b44f6b5..cd585cd 100644
--- a/drivers/reset/reset-sunxi.c
+++ b/drivers/reset/reset-sunxi.c
@@ -34,15 +34,16 @@ static int sunxi_reset_assert(struct reset_controller_dev *rcdev,
struct sunxi_reset_data *data = container_of(rcdev,
struct sunxi_reset_data,
rcdev);
- int bank = id / BITS_PER_LONG;
- int offset = id % BITS_PER_LONG;
+ int reg_width = sizeof(u32);
+ int bank = id / (reg_width * BITS_PER_BYTE);
+ int offset = id % (reg_width * BITS_PER_BYTE);
unsigned long flags;
u32 reg;

spin_lock_irqsave(&data->lock, flags);

- reg = readl(data->membase + (bank * 4));
- writel(reg & ~BIT(offset), data->membase + (bank * 4));
+ reg = readl(data->membase + (bank * reg_width));
+ writel(reg & ~BIT(offset), data->membase + (bank * reg_width));

spin_unlock_irqrestore(&data->lock, flags);

@@ -55,15 +56,16 @@ static int sunxi_reset_deassert(struct reset_controller_dev *rcdev,
struct sunxi_reset_data *data = container_of(rcdev,
struct sunxi_reset_data,
rcdev);
- int bank = id / BITS_PER_LONG;
- int offset = id % BITS_PER_LONG;
+ int reg_width = sizeof(u32);
+ int bank = id / (reg_width * BITS_PER_BYTE);
+ int offset = id % (reg_width * BITS_PER_BYTE);
unsigned long flags;
u32 reg;

spin_lock_irqsave(&data->lock, flags);

- reg = readl(data->membase + (bank * 4));
- writel(reg | BIT(offset), data->membase + (bank * 4));
+ reg = readl(data->membase + (bank * reg_width));
+ writel(reg | BIT(offset), data->membase + (bank * reg_width));

spin_unlock_irqrestore(&data->lock, flags);

--
2.8.2
\
 
 \ /
  Last update: 2017-03-06 02:37    [W:0.058 / U:0.652 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site