lkml.org 
[lkml]   [2017]   [Mar]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5/5] ARM: dts: imx6qp-sabresd: Set reg_arm regulator supply
Date
On imx6qp-sabresd LDO_ARM is connected to a different PMIC output than
the other imx6qdl-sabresd boards.

Setting cpu0 arm-supply to sw2_reg is wrong, this must have mistakenly
slipped out of the vendor tree where this is are used for LDO bypass.

Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
---
arch/arm/boot/dts/imx6qp-sabresd.dts | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/imx6qp-sabresd.dts b/arch/arm/boot/dts/imx6qp-sabresd.dts
index b234580..a8a5004 100644
--- a/arch/arm/boot/dts/imx6qp-sabresd.dts
+++ b/arch/arm/boot/dts/imx6qp-sabresd.dts
@@ -50,8 +50,8 @@
compatible = "fsl,imx6qp-sabresd", "fsl,imx6qp";
};

-&cpu0 {
- arm-supply = <&sw2_reg>;
+&reg_arm {
+ vin-supply = <&sw2_reg>;
};

&iomuxc {
--
2.7.4
\
 
 \ /
  Last update: 2017-03-31 21:27    [W:0.114 / U:0.060 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site