lkml.org 
[lkml]   [2017]   [Mar]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 2/4] dt-binding: meson_uart: add documentation for the UARTs of amlogic
Date
Add the documentation for the device tree binding of meson_uart

Signed-off-by: Helmut Klein <hgkr.klein@gmail.com>
---
.../bindings/serial/amlogic,meson_uart.txt | 30 ++++++++++++++++++++++
1 file changed, 30 insertions(+)
create mode 100644 Documentation/devicetree/bindings/serial/amlogic,meson_uart.txt

diff --git a/Documentation/devicetree/bindings/serial/amlogic,meson_uart.txt b/Documentation/devicetree/bindings/serial/amlogic,meson_uart.txt
new file mode 100644
index 000000000000..8250a191c2fc
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/amlogic,meson_uart.txt
@@ -0,0 +1,30 @@
+* Amlogic Meson UART, used in multiple SoCs (e.g. S905, s905X, ...)
+
+Required properties:
+- compatible : "amlogic,meson-uart"
+- reg : offset and length of the register set for the device.
+- interrupts : device interrupt
+- clocks : a list of phandle + clock-specifier pairs, one for each
+ entry in clock names.
+- clocks-names : contains:
+ * "xtal" for the baud rate clock
+ * "core" for the core clock of none AO UARTs (optional)
+
+e.g.
+uart_A: serial@84c0 {
+ compatible = "amlogic,meson-uart";
+ reg = <0x0 0x84c0 0x0 0x14>;
+ pinctrl-0 = <&uart_a_pins &uart_a_cts_rts_pins>;
+ interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&xtal>, <&clkc CLKID_UART0>;
+ clock-names = "xtal", "core";
+ status = "ok";
+};
+
+Note: Each port should have an alias correctly numbered in "aliases" node.
+
+e.g.
+aliases {
+ serial0 = &uart_AO;
+ serial1 = &uart_A;
+};
--
2.11.0
\
 
 \ /
  Last update: 2017-03-31 18:55    [W:0.111 / U:1.880 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site