lkml.org 
[lkml]   [2017]   [Mar]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] mfd: stmpe: Fix bit clearing on STMPE1600
Date
GPIO bits clearing on pins assigned to STMPE1600
had no effects due to missing "clear registers"
settings within stmpe1600_regs[].
STMPE1600 does not have dedicated "clear registers",
but single "set/clear registers", hence stmpe1600_regs[]
"clear registers" (STMPE_IDX_GPCR_XXX) must be set to
same value as "set registers" (STMPE_IDX_GPSR_XXX), ie
STMPE1600_REG_GPSR_XXX.

Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com>
---
drivers/mfd/stmpe.c | 2 ++
1 file changed, 2 insertions(+)

diff --git a/drivers/mfd/stmpe.c b/drivers/mfd/stmpe.c
index b0c7bcd..566caca 100644
--- a/drivers/mfd/stmpe.c
+++ b/drivers/mfd/stmpe.c
@@ -568,6 +568,8 @@ static int stmpe811_get_altfunc(struct stmpe *stmpe, enum stmpe_block block)
[STMPE_IDX_GPMR_CSB] = STMPE1600_REG_GPMR_MSB,
[STMPE_IDX_GPSR_LSB] = STMPE1600_REG_GPSR_LSB,
[STMPE_IDX_GPSR_CSB] = STMPE1600_REG_GPSR_MSB,
+ [STMPE_IDX_GPCR_LSB] = STMPE1600_REG_GPSR_LSB,
+ [STMPE_IDX_GPCR_CSB] = STMPE1600_REG_GPSR_MSB,
[STMPE_IDX_GPDR_LSB] = STMPE1600_REG_GPDR_LSB,
[STMPE_IDX_GPDR_CSB] = STMPE1600_REG_GPDR_MSB,
[STMPE_IDX_IEGPIOR_LSB] = STMPE1600_REG_IEGPIOR_LSB,
--
1.9.1
\
 
 \ /
  Last update: 2017-03-31 10:13    [W:0.053 / U:2.812 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site