lkml.org 
[lkml]   [2017]   [Mar]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH] serial: tegra: Map the iir register to default defines
From
Hey Jon,

On March 30, 2017 3:42:19 PM CEST, Jon Hunter <jonathanh@nvidia.com> wrote:
>
>On 29/03/17 19:48, Olliver Schinagl wrote:
>> The tegra serial IP seems to be following the common layout and the
>> interrupt ID's match up nicely. Replace the magic values to match the
>> common serial_reg defines, with the addition of the Tegra unique End
>of
>> Data interrupt.
>>
>> Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>
>> ---
>> Note I do not own any tegra hardware and just noticed it while
>working on my
>> somewhat related previous patch,
>> "serial: Do not treat the IIR register as a bitfield"
>>
>> As such, this patch can only be applied after the aforementioned
>patch or the
>> iir variable will not have its mask applied yet.
>
>Nit-pick. If this is the case, then this should really be part of a
>patch series so it is obvious to everyone that this should only be
>applied after the other patch.
Yes, and it was, but I did not want to have the really big list of names in this much smaller group.
>
>Cheers
>Jon

--
Sent from my Android device with K-9 Mail. Please excuse my brevity.

\
 
 \ /
  Last update: 2017-03-30 17:39    [W:0.069 / U:1.216 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site