lkml.org 
[lkml]   [2017]   [Mar]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 0/4] fujitsu_init() cleanup
Hi Michael

On Wed, Mar 01, 2017 at 09:10:40AM +0100, Micha?? K??pie?? wrote:
> These patches should make fujitsu_init() a bit more palatable. No
> changes are made to platform device code yet, for clarity these will be
> posted in a separate series after this one gets applied.

I have a preliminary report. The backlight functionality remains functional
on an S7020 across all four of the patches in this series and with the
additional 2-patch cleanup series applied.

With regard to patch 2/4 you wrote:
> Jonathan, this *really* needs testing on relevant hardware. After
> applying this patch, you should be able to turn LCD backlight on and off
> using /sys/class/backlight/fujitsu-laptop/bl_power. Also, the value
> returned by that attribute upon read should be in sync with actual
> backlight state even right after loading the module (i.e. before writing
> anything to bl_power). Please let me know if any of the above is not
> true and the module works correctly without this patch applied.

With patch 2/4 applied:

* It is possible to read bl_power

* It is possible to write a value to bl_power and read that value back

* Writing values to bl_power does not appear to affect the LCD panel in
any way. That is, the backlight remains unchanged regardless of the
value written.

* Behaviour is the same both under X and from the terminal.

Backing out patch 2/4 but with all others still in place, resulted in no
change in behaviour. So while bl_power had no effect with patch 2/4 in
place, it seems that patch 2/4 is *not* the cause of this.

I shall run some more bl_power tests and complete a review of the code later
this weekend.

Regards
jonathan

\
 
 \ /
  Last update: 2017-03-04 03:01    [W:0.087 / U:0.676 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site