lkml.org 
[lkml]   [2017]   [Mar]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 3/8] ARM: OMAP5: Thermal: Add slope and offset values
From
Date


On Wednesday 29 March 2017 10:03 AM, Eduardo Valentin wrote:
> On Thu, Mar 09, 2017 at 01:35:57PM +0530, Keerthy wrote:
>> Currently the slope and offset values for calculating the
>> hot spot temperature of a particular thermal zone is part
>> of driver data. Pass them here instead and obtain the values
>> while of node parsing.
>
>
> The patch is fine.. but
>
>>
>> Signed-off-by: Keerthy <j-keerthy@ti.com>
>> ---
>> arch/arm/boot/dts/omap5.dtsi | 9 +++++++++
>> 1 file changed, 9 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
>> index 222155c..eaff2a5 100644
>> --- a/arch/arm/boot/dts/omap5.dtsi
>> +++ b/arch/arm/boot/dts/omap5.dtsi
>> @@ -1127,6 +1127,15 @@
>>
>> &cpu_thermal {
>> polling-delay = <500>; /* milliseconds */
>> + coefficients = <65 (-1791)>;
>
> I suppose you tried this change with this patch:
> https://patchwork.kernel.org/patch/9619577/
> ?
>
> Otherwise, I do not see how your coeff would work, right?

IIRC i did not have that patch.

But No issues there. I did try deliberately with negative values and i
retrieved the negative values in driver nicely.

Fox ex: -20 unsigned when retrieved in driver as an int coeff will give
me -20. I checked with multiple negative co-efficients and i retrieved
the passed negative co-efficients in driver from DT.

Regards,
Keerthy


>
>> };
>>
>> /include/ "omap54xx-clocks.dtsi"
>> +
>> +&gpu_thermal {
>> + coefficients = <117 (-2992)>;
>> +};
>> +
>> +&core_thermal {
>> + coefficients = <0 2000>;
>> +};
>> --
>> 1.9.1
>>

\
 
 \ /
  Last update: 2017-03-30 05:30    [W:0.044 / U:0.360 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site