[lkml]   [2017]   [Mar]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject[PATCH v8 0/4] i.MX7 PCI support
Hello, everyone:

This is a eightth iteration of the code that adds PCI-subsystem bits
necessary for enabling PCI support on i.MX7.

NOTE: To test this patchset with real i.MX7 hardware, additional
patches, that are being upstreamed via different trees, are needed. Full
working tree is availible at:

Changes since v7 (can be found at [version7]):

- Collected Reviewed-by for the whole series from Lucas

Changes since v6 (can be found at [version6]):

- Rebased against latest changes in 'next' of PCI subsystem
git tree

Chagnes since v5 (can be found at [version5]):

- Collected ACKs from Lee and Rob

Changes since v4 (can be found at [version4]):

- Dropped typo-fix patch (originally patch #1 of the

- Added patch with workaround to address speed change false
failures (I kept it as a separate patch to better document
exchange with NXP/Freescale that lead to that patch)

- Added patch to avoid speed change on links configured Gen1
only (Let me know if that is a terrible idea)

- Addressed section mismatch problem by moving call to
hook_fault_code to happend before driver registration.

Changes since v3 (can be found at [version3]):
- Move all of the reset_control_assert's into imx6_pcie_assert_core_reset
- Documented required reset and power domain DT bindings

Changes since v2 (can be found at [version2]):

- Collected Reviewed-by for patch #2 from Lucas
- Reset logic implementation moved out into a reset controller
driver (see [reset1])
- Removed unused leftover code

Changes since v1 (can be found at [version1]):

- All GPC related code moved into a separate driver (see [gpc1])
- Removed GPIO probe deferral logging
- Fixed section mismatch warning
- Minor reformatting of fsl,imx6q-pcie.txt(as per Rob
Herring's request)


Andrey Smirnov (4):
PCI: imx6: Add code to support i.MX7D
PCI: imx6: Allow probe deferal by reset GPIO
PCI: imx6: Do not wait for speed change on i.MX7
PCI: imx6: Do not switch speed if Gen2 is disabled

.../devicetree/bindings/pci/fsl,imx6q-pcie.txt | 13 +-
drivers/pci/dwc/pci-imx6.c | 198 +++++++++++++++------
include/linux/mfd/syscon/imx7-iomuxc-gpr.h | 4 +
3 files changed, 160 insertions(+), 55 deletions(-)


 \ /
  Last update: 2017-03-28 17:44    [W:0.091 / U:0.032 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site