lkml.org 
[lkml]   [2017]   [Mar]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v1 3/8] clk: meson: add audio clock divider support
From
Date
On Tue, 2017-03-28 at 16:58 +0200, Hendrik v. Raven wrote:
> On Tue, Mar 28, 2017 at 04:46:00PM +0200, Jerome Brunet wrote:
> > The audio divider needs a specific clock divider driver.
> > With am mpll parent clock, which is able to provide a fairly precise rate,
> > the generic divider tends to select low value of the divider. In such case
> > the quality of the clock is very poor. For the same final rate, maximizing
> > the audio clock divider value and selecting the corresponding mpll rate
> > gives better results. This is what this driver aims to acheive. So far, so
> > good.
> >
> > Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
> > ---
> >  drivers/clk/meson/Makefile            |   2 +-
> >  drivers/clk/meson/clk-audio-divider.c | 149
> > ++++++++++++++++++++++++++++++++++
> >  drivers/clk/meson/clkc.h              |  10 +++
> >  3 files changed, 160 insertions(+), 1 deletion(-)
> >  create mode 100644 drivers/clk/meson/clk-audio-divider.c
> >
> > diff --git a/drivers/clk/meson/Makefile b/drivers/clk/meson/Makefile
> > index 349583405b7c..83b6d9d65aa1 100644
> > --- a/drivers/clk/meson/Makefile
> > +++ b/drivers/clk/meson/Makefile
> > @@ -2,6 +2,6 @@
> >  # Makefile for Meson specific clk
> >  #
> >  
> > -obj-$(CONFIG_COMMON_CLK_AMLOGIC) += clk-pll.o clk-cpu.o clk-mpll.o
> > +obj-$(CONFIG_COMMON_CLK_AMLOGIC) += clk-pll.o clk-cpu.o clk-mpll.o clk-
> > audio-divider.o
> >  obj-$(CONFIG_COMMON_CLK_MESON8B) += meson8b.o
> >  obj-$(CONFIG_COMMON_CLK_GXBB)  += gxbb.o gxbb-aoclk.o
> > diff --git a/drivers/clk/meson/clk-audio-divider.c b/drivers/clk/meson/clk-
> > audio-divider.c
> > new file mode 100644
> > index 000000000000..ac713b9ea84a
> > --- /dev/null
> > +++ b/drivers/clk/meson/clk-audio-divider.c
> > @@ -0,0 +1,149 @@
> > +/*
> > + * Copyright (c) 2017 AmLogic, Inc.
> > + * Author: Jerome Brunet <jbrunet@baylibre.com>
> > + *
> > + * This program is free software; you can redistribute it and/or modify it
> > + * under the terms and conditions of the GNU General Public License,
> > + * version 2, as published by the Free Software Foundation.
> > + *
> > + * This program is distributed in the hope it will be useful, but WITHOUT
> > + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> > + * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
> > for
> > + * more details.
> > + *
> > + * You should have received a copy of the GNU General Public License along
> > with
> > + * this program.  If not, see <http://www.gnu.org/licenses/>.
> > + */
> > +
> > +/*
> > + * i2s master clock divider: The algorithm of the generic clk-divider used
> > with
> > + * a very precise clock parent such as the mpll tends to select a low
> > divider
> > + * factor. This gives very results with this particular divider, especially
> > with
>
> a "poor" appears to be missing here
Indeed, thanks for spotting this

>
> > + * high frequencies (> 100 MHz)
> > + *
> > + * This driver try to select the maximum possible divider with the rate the
> > + * upstream clock can provide.
> > + */
> > +
> > +#include <linux/clk-provider.h>
> > +#include "clkc.h"
> > +
> > +#define to_meson_clk_audio_divider(_hw) container_of(_hw, \
> > + struct meson_clk_audio_divider, hw)
> > +
> > +static int _div_round(unsigned long parent_rate, unsigned long rate,
> > +       unsigned long flags)
> > +{
> > + if (flags & CLK_DIVIDER_ROUND_CLOSEST)
> > + return DIV_ROUND_CLOSEST_ULL((u64)parent_rate, rate);
> > +
> > + return DIV_ROUND_UP_ULL((u64)parent_rate, rate);
> > +}
> > +
> > +static int _get_val(unsigned long parent_rate, unsigned long rate)
> > +{
> > + return DIV_ROUND_UP_ULL((u64)parent_rate, rate) - 1;
> > +}
> > +
> > +static int _valid_divider(struct clk_hw *hw, int divider)
> > +{
> > + struct meson_clk_audio_divider *adiv =
> > + to_meson_clk_audio_divider(hw);
> > + int max_divider;
> > + u8 width;
> > +
> > + width = adiv->div.width;
> > + max_divider = 1 << width;
> > +
> > + if (divider < 1)
> > + return 1;
> > + else if (divider > max_divider)
> > + return max_divider;
> > +
> > + return divider;
>
> This can be replaced by 
> return clamp(divider, 1, max_divider);
Will be replaced in v2. Thx

>
> > +}
> > +
> > +static unsigned long audio_divider_recalc_rate(struct clk_hw *hw,
> > +        unsigned long parent_rate)
> > +{
> > + struct meson_clk_audio_divider *adiv =
> > + to_meson_clk_audio_divider(hw);
> > + struct parm *p;
> > + unsigned long reg, divider;
> > +
> > + p = &adiv->div;
> > + reg = readl(adiv->base + p->reg_off);
> > + divider = PARM_GET(p->width, p->shift, reg) + 1;
> > +
> > + return DIV_ROUND_UP_ULL((u64)parent_rate, divider);
> > +}
> > +
> > +static long audio_divider_round_rate(struct clk_hw *hw,
> > +      unsigned long rate,
> > +      unsigned long *parent_rate)
> > +{
> > + struct meson_clk_audio_divider *adiv =
> > + to_meson_clk_audio_divider(hw);
> > + unsigned long max_prate;
> > + int divider;
> > +
> > + if (!(clk_hw_get_flags(hw) & CLK_SET_RATE_PARENT)) {
> > + divider = _div_round(*parent_rate, rate, adiv->flags);
> > + divider = _valid_divider(hw, divider);
> > + return DIV_ROUND_UP_ULL((u64)*parent_rate, divider);
> > + }
> > +
> > + /* Get the maximum parent rate */
> > + max_prate = clk_hw_round_rate(clk_hw_get_parent(hw), ULONG_MAX);
> > +
> > + /* Get the corresponding rounded down divider */
> > + divider = max_prate / rate;
> > + divider = _valid_divider(hw, divider);
> > +
> > + /* Get actual rate of the parent */
> > + *parent_rate = clk_hw_round_rate(clk_hw_get_parent(hw),
> > +  divider * rate);
> > +
> > + return DIV_ROUND_UP_ULL((u64)*parent_rate, divider);
> > +}
> > +
> > +static int audio_divider_set_rate(struct clk_hw *hw,
> > +   unsigned long rate,
> > +   unsigned long parent_rate)
> > +{
> > + struct meson_clk_audio_divider *adiv =
> > + to_meson_clk_audio_divider(hw);
> > + struct parm *p;
> > + unsigned long reg, flags = 0;
> > + int val;
> > +
> > + val = _get_val(parent_rate, rate);
> > +
> > + if (adiv->lock)
> > + spin_lock_irqsave(adiv->lock, flags);
> > + else
> > + __acquire(adiv->lock);
> > +
> > + p = &adiv->div;
> > + reg = readl(adiv->base + p->reg_off);
> > + reg = PARM_SET(p->width, p->shift, reg, val);
> > + writel(reg, adiv->base + p->reg_off);
> > +
> > + if (adiv->lock)
> > + spin_unlock_irqrestore(adiv->lock, flags);
> > + else
> > + __release(adiv->lock);
> > +
> > + return 0;
> > +}
> > +
> > +const struct clk_ops meson_clk_audio_divider_ro_ops = {
> > + .recalc_rate = audio_divider_recalc_rate,
> > + .round_rate = audio_divider_round_rate,
> > +};
> > +
> > +const struct clk_ops meson_clk_audio_divider_ops = {
> > + .recalc_rate = audio_divider_recalc_rate,
> > + .round_rate = audio_divider_round_rate,
> > + .set_rate = audio_divider_set_rate,
> > +};
> > diff --git a/drivers/clk/meson/clkc.h b/drivers/clk/meson/clkc.h
> > index b0c9999d03de..d6feafe8bd6c 100644
> > --- a/drivers/clk/meson/clkc.h
> > +++ b/drivers/clk/meson/clkc.h
> > @@ -121,6 +121,14 @@ struct meson_clk_mpll {
> >   spinlock_t *lock;
> >  };
> >  
> > +struct meson_clk_audio_divider {
> > + struct clk_hw hw;
> > + void __iomem *base;
> > + struct parm div;
> > + u8 flags;
> > + spinlock_t *lock;
> > +};
> > +
> >  #define MESON_GATE(_name, _reg, _bit)
> > \
> >  struct clk_gate _name = {  \
> >   .reg = (void __iomem *) _reg, 
> > \
> > @@ -141,5 +149,7 @@ extern const struct clk_ops meson_clk_pll_ops;
> >  extern const struct clk_ops meson_clk_cpu_ops;
> >  extern const struct clk_ops meson_clk_mpll_ro_ops;
> >  extern const struct clk_ops meson_clk_mpll_ops;
> > +extern const struct clk_ops meson_clk_audio_divider_ro_ops;
> > +extern const struct clk_ops meson_clk_audio_divider_ops;
> >  
> >  #endif /* __CLKC_H */
> > -- 
> > 2.9.3
> >
> >
> > _______________________________________________
> > linux-amlogic mailing list
> > linux-amlogic@lists.infradead.org
> > http://lists.infradead.org/mailman/listinfo/linux-amlogic

\
 
 \ /
  Last update: 2017-03-28 17:28    [W:0.044 / U:1.772 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site