lkml.org 
[lkml]   [2017]   [Mar]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: Bisected softirq accounting issue in v4.11-rc1~170^2~28
On Tue, 28 Mar 2017 18:34:52 +0800
Wanpeng Li <kernellwp@gmail.com> wrote:

> 2017-03-28 16:14 GMT+08:00 Jesper Dangaard Brouer <brouer@redhat.com>:
> >
> > (While evaluating some changes to the page allocator) I ran into an
> > issue with ksoftirqd getting too much CPU sched time.
> >
> > I bisected the problem to
> > a499a5a14dbd ("sched/cputime: Increment kcpustat directly on irqtime account")
> >
> > a499a5a14dbd1d0315a96fc62a8798059325e9e6 is the first bad commit
> > commit a499a5a14dbd1d0315a96fc62a8798059325e9e6
> > Author: Frederic Weisbecker <fweisbec@gmail.com>
> > Date: Tue Jan 31 04:09:32 2017 +0100
> >
> > sched/cputime: Increment kcpustat directly on irqtime account
> >
> > The irqtime is accounted is nsecs and stored in
> > cpu_irq_time.hardirq_time and cpu_irq_time.softirq_time. Once the
> > accumulated amount reaches a new jiffy, this one gets accounted to the
> > kcpustat.
> >
> > This was necessary when kcpustat was stored in cputime_t, which could at
> > worst have jiffies granularity. But now kcpustat is stored in nsecs
> > so this whole discretization game with temporary irqtime storage has
> > become unnecessary.
> >
> > We can now directly account the irqtime to the kcpustat.
> >
> > Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
> > Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
> > Cc: Fenghua Yu <fenghua.yu@intel.com>
> > Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
> > Cc: Linus Torvalds <torvalds@linux-foundation.org>
> > Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
> > Cc: Michael Ellerman <mpe@ellerman.id.au>
> > Cc: Paul Mackerras <paulus@samba.org>
> > Cc: Peter Zijlstra <peterz@infradead.org>
> > Cc: Rik van Riel <riel@redhat.com>
> > Cc: Stanislaw Gruszka <sgruszka@redhat.com>
> > Cc: Thomas Gleixner <tglx@linutronix.de>
> > Cc: Tony Luck <tony.luck@intel.com>
> > Cc: Wanpeng Li <wanpeng.li@hotmail.com>
> > Link: http://lkml.kernel.org/r/1485832191-26889-17-git-send-email-fweisbec@gmail.com
> > Signed-off-by: Ingo Molnar <mingo@kernel.org>
> >
> > The reproducer is running a userspace udp_sink[1] program, and taskset
> > pinning the process to the same CPU as softirq RX is running on, and
> > starting a UDP flood with pktgen (tool part of kernel tree:
> > samples/pktgen/pktgen_sample03_burst_single_flow.sh).
> >
> > [1] udp_sink
> > https://github.com/netoptimizer/network-testing/blob/master/src/udp_sink.c
> >
> > The expected results (after commit 4cd13c21b207 ("softirq: Let
> > ksoftirqd do its job")) is that the scheduler split the CPU time 50/50
> > between udp_sink and ksoftirqd.
> >
> > After this commit, the udp_sink program does not get any sched CPU
> > time, and no packets are delivered to userspace. (All packets are
> > dropped by softirq due to a full socket queue, nstat UdpRcvbufErrors).
> >
> > A related symptom is that ksoftirqd no longer get accounted in top.
> >
> > $ grep CONFIG_IRQ_TIME_ACCOUNTING .config
> > CONFIG_IRQ_TIME_ACCOUNTING=y
> >
> > Full .config uploaded here[2]:
> > [2] http://people.netfilter.org/hawk/kconfig/config02-bisect-softirq-a499a5a14dbd
>
> void irqtime_account_irq(struct task_struct *curr)
> {
> struct irqtime *irqtime = this_cpu_ptr(&cpu_irqtime);
> u64 *cpustat = kcpustat_this_cpu->cpustat;
> s64 delta;
> int cpu;
>
> if (!sched_clock_irqtime)
> return;
>
> cpu = smp_processor_id();
> delta = sched_clock_cpu(cpu) - irqtime->irq_start_time;
>
> sched_clock_cpu(cpu) should be converted from cputime to ns. However,
> cputime_to_nsecs() API is removed by
> https://lkml.org/lkml/2017/1/22/230 for generic usage, so could you
> try the below patch just for testing?

Sure... it didn't solve the problem :-(


> diff --git a/include/linux/sched/cputime.h b/include/linux/sched/cputime.h
> index 4c5b973..166efba 100644
> --- a/include/linux/sched/cputime.h
> +++ b/include/linux/sched/cputime.h
> @@ -7,14 +7,14 @@
> * cputime accounting APIs:
> */
>
> -#ifdef CONFIG_VIRT_CPU_ACCOUNTING_NATIVE
> -#include <asm/cputime.h>
> +#define cputime_div(__ct, divisor) div_u64((__force u64)__ct, divisor)
> +#define cputime_to_usecs(__ct) \
> + cputime_div(__ct, NSEC_PER_USEC)
>
> #ifndef cputime_to_nsecs
> # define cputime_to_nsecs(__ct) \
> (cputime_to_usecs(__ct) * NSEC_PER_USEC)
> #endif
> -#endif /* CONFIG_VIRT_CPU_ACCOUNTING_NATIVE */
>
> #ifdef CONFIG_VIRT_CPU_ACCOUNTING_GEN
> extern void task_cputime(struct task_struct *t,
> diff --git a/kernel/sched/cputime.c b/kernel/sched/cputime.c
> index f3778e2b..68064d1 100644
> --- a/kernel/sched/cputime.c
> +++ b/kernel/sched/cputime.c
> @@ -49,7 +49,7 @@ void irqtime_account_irq(struct task_struct *curr)
> return;
>
> cpu = smp_processor_id();
> - delta = sched_clock_cpu(cpu) - irqtime->irq_start_time;
> + delta = cputime_to_nsecs(sched_clock_cpu(cpu)) - irqtime->irq_start_time;
> irqtime->irq_start_time += delta;
>
> u64_stats_update_begin(&irqtime->sync);


--
Best regards,
Jesper Dangaard Brouer
MSc.CS, Principal Kernel Engineer at Red Hat
LinkedIn: http://www.linkedin.com/in/brouer

\
 
 \ /
  Last update: 2017-03-28 13:51    [W:0.096 / U:0.260 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site