lkml.org 
[lkml]   [2017]   [Mar]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4/4] Input: synaptics-rmi4 - when registering sensors do not call them "drivers"
Date
We are not registering drivers, but transport devices (AKA sensors), so
let's call them that.

Also let's rename "retval" to "error" in probe() functions as the variables
are used to store error codes.

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
drivers/input/rmi4/rmi_i2c.c | 51 +++++++++++++++++++++---------------------
drivers/input/rmi4/rmi_smbus.c | 43 +++++++++++++++++------------------
drivers/input/rmi4/rmi_spi.c | 44 +++++++++++++++++++-----------------
3 files changed, 69 insertions(+), 69 deletions(-)

diff --git a/drivers/input/rmi4/rmi_i2c.c b/drivers/input/rmi4/rmi_i2c.c
index 082306d7c207..e28663ef9e5a 100644
--- a/drivers/input/rmi4/rmi_i2c.c
+++ b/drivers/input/rmi4/rmi_i2c.c
@@ -204,7 +204,7 @@ static int rmi_i2c_probe(struct i2c_client *client,
struct rmi_device_platform_data *client_pdata =
dev_get_platdata(&client->dev);
struct rmi_i2c_xport *rmi_i2c;
- int retval;
+ int error;

rmi_i2c = devm_kzalloc(&client->dev, sizeof(struct rmi_i2c_xport),
GFP_KERNEL);
@@ -220,30 +220,31 @@ static int rmi_i2c_probe(struct i2c_client *client,

rmi_dbg(RMI_DEBUG_XPORT, &client->dev, "Probing %s.\n",
dev_name(&client->dev));
+
if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
dev_err(&client->dev,
- "adapter does not support required functionality.\n");
+ "adapter does not support required functionality\n");
return -ENODEV;
}

rmi_i2c->supplies[0].supply = "vdd";
rmi_i2c->supplies[1].supply = "vio";
- retval = devm_regulator_bulk_get(&client->dev,
+ error = devm_regulator_bulk_get(&client->dev,
ARRAY_SIZE(rmi_i2c->supplies),
rmi_i2c->supplies);
- if (retval < 0)
- return retval;
+ if (error < 0)
+ return error;

- retval = regulator_bulk_enable(ARRAY_SIZE(rmi_i2c->supplies),
+ error = regulator_bulk_enable(ARRAY_SIZE(rmi_i2c->supplies),
rmi_i2c->supplies);
- if (retval < 0)
- return retval;
+ if (error < 0)
+ return error;

- retval = devm_add_action_or_reset(&client->dev,
+ error = devm_add_action_or_reset(&client->dev,
rmi_i2c_regulator_bulk_disable,
rmi_i2c);
- if (retval)
- return retval;
+ if (error)
+ return error;

of_property_read_u32(client->dev.of_node, "syna,startup-delay-ms",
&rmi_i2c->startup_delay);
@@ -263,26 +264,26 @@ static int rmi_i2c_probe(struct i2c_client *client,
* Setting the page to zero will (a) make sure the PSR is in a
* known state, and (b) make sure we can talk to the device.
*/
- retval = rmi_set_page(rmi_i2c, 0);
- if (retval) {
- dev_err(&client->dev, "Failed to set page select to 0.\n");
- return retval;
+ error = rmi_set_page(rmi_i2c, 0);
+ if (error) {
+ dev_err(&client->dev, "Failed to set page select to 0\n");
+ return error;
}

- retval = rmi_register_transport_device(&rmi_i2c->xport);
- if (retval) {
- dev_err(&client->dev, "Failed to register transport driver at 0x%.2X.\n",
- client->addr);
- return retval;
+ dev_info(&client->dev, "registering I2C-connected sensor\n");
+
+ error = rmi_register_transport_device(&rmi_i2c->xport);
+ if (error) {
+ dev_err(&client->dev, "failed to register sensor: %d\n", error);
+ return error;
}
- retval = devm_add_action_or_reset(&client->dev,
+
+ error = devm_add_action_or_reset(&client->dev,
rmi_i2c_unregister_transport,
rmi_i2c);
- if (retval)
- return retval;
+ if (error)
+ return error;

- dev_info(&client->dev, "registered rmi i2c driver at %#04x.\n",
- client->addr);
return 0;
}

diff --git a/drivers/input/rmi4/rmi_smbus.c b/drivers/input/rmi4/rmi_smbus.c
index 724643bf31a6..e84400301973 100644
--- a/drivers/input/rmi4/rmi_smbus.c
+++ b/drivers/input/rmi4/rmi_smbus.c
@@ -53,6 +53,7 @@ static int rmi_smb_get_version(struct rmi_smb_xport *rmi_smb)
dev_err(&client->dev, "failed to get SMBus version number!\n");
return retval;
}
+
return retval + 1;
}

@@ -274,19 +275,24 @@ static int rmi_smb_probe(struct i2c_client *client,
{
struct rmi_device_platform_data *pdata = dev_get_platdata(&client->dev);
struct rmi_smb_xport *rmi_smb;
- int retval;
int smbus_version;
+ int error;
+
+ if (!pdata) {
+ dev_err(&client->dev, "no platform data, aborting\n");
+ return -ENOMEM;
+ }

if (!i2c_check_functionality(client->adapter,
I2C_FUNC_SMBUS_READ_BLOCK_DATA |
I2C_FUNC_SMBUS_HOST_NOTIFY)) {
dev_err(&client->dev,
- "adapter does not support required functionality.\n");
+ "adapter does not support required functionality\n");
return -ENODEV;
}

if (client->irq <= 0) {
- dev_err(&client->dev, "no IRQ provided, giving up.\n");
+ dev_err(&client->dev, "no IRQ provided, giving up\n");
return client->irq ? client->irq : -ENODEV;
}

@@ -295,12 +301,7 @@ static int rmi_smb_probe(struct i2c_client *client,
if (!rmi_smb)
return -ENOMEM;

- if (!pdata) {
- dev_err(&client->dev, "no platform data, aborting\n");
- return -ENOMEM;
- }
-
- rmi_dbg(RMI_DEBUG_XPORT, &client->dev, "Probing %s.\n",
+ rmi_dbg(RMI_DEBUG_XPORT, &client->dev, "Probing %s\n",
dev_name(&client->dev));

rmi_smb->client = client;
@@ -313,34 +314,30 @@ static int rmi_smb_probe(struct i2c_client *client,
rmi_smb->xport.proto_name = "smb2";
rmi_smb->xport.ops = &rmi_smb_ops;

- retval = rmi_smb_get_version(rmi_smb);
- if (retval < 0)
- return retval;
+ smbus_version = rmi_smb_get_version(rmi_smb);
+ if (smbus_version < 0)
+ return smbus_version;

- smbus_version = retval;
rmi_dbg(RMI_DEBUG_XPORT, &client->dev, "Smbus version is %d",
smbus_version);

if (smbus_version != 2) {
- dev_err(&client->dev, "Unrecognized SMB version %d.\n",
+ dev_err(&client->dev, "Unrecognized SMB version %d\n",
smbus_version);
return -ENODEV;
}

i2c_set_clientdata(client, rmi_smb);

- retval = rmi_register_transport_device(&rmi_smb->xport);
- if (retval) {
- dev_err(&client->dev, "Failed to register transport driver at 0x%.2X.\n",
- client->addr);
- i2c_set_clientdata(client, NULL);
- return retval;
+ dev_info(&client->dev, "registering SMbus-connected sensor\n");
+
+ error = rmi_register_transport_device(&rmi_smb->xport);
+ if (error) {
+ dev_err(&client->dev, "failed to register sensor: %d\n", error);
+ return error;
}

- dev_info(&client->dev, "registered rmi smb driver at %#04x.\n",
- client->addr);
return 0;
-
}

static int rmi_smb_remove(struct i2c_client *client)
diff --git a/drivers/input/rmi4/rmi_spi.c b/drivers/input/rmi4/rmi_spi.c
index 69548d7d1f10..d97a85907ed6 100644
--- a/drivers/input/rmi4/rmi_spi.c
+++ b/drivers/input/rmi4/rmi_spi.c
@@ -370,7 +370,7 @@ static int rmi_spi_probe(struct spi_device *spi)
struct rmi_spi_xport *rmi_spi;
struct rmi_device_platform_data *pdata;
struct rmi_device_platform_data *spi_pdata = spi->dev.platform_data;
- int retval;
+ int error;

if (spi->master->flags & SPI_MASTER_HALF_DUPLEX)
return -EINVAL;
@@ -383,9 +383,9 @@ static int rmi_spi_probe(struct spi_device *spi)
pdata = &rmi_spi->xport.pdata;

if (spi->dev.of_node) {
- retval = rmi_spi_of_probe(spi, pdata);
- if (retval)
- return retval;
+ error = rmi_spi_of_probe(spi, pdata);
+ if (error)
+ return error;
} else if (spi_pdata) {
*pdata = *spi_pdata;
}
@@ -396,10 +396,10 @@ static int rmi_spi_probe(struct spi_device *spi)
if (pdata->spi_data.mode)
spi->mode = pdata->spi_data.mode;

- retval = spi_setup(spi);
- if (retval < 0) {
+ error = spi_setup(spi);
+ if (error < 0) {
dev_err(&spi->dev, "spi_setup failed!\n");
- return retval;
+ return error;
}

pdata->irq = spi->irq;
@@ -413,32 +413,34 @@ static int rmi_spi_probe(struct spi_device *spi)

spi_set_drvdata(spi, rmi_spi);

- retval = rmi_spi_manage_pools(rmi_spi, RMI_SPI_DEFAULT_XFER_BUF_SIZE);
- if (retval)
- return retval;
+ error = rmi_spi_manage_pools(rmi_spi, RMI_SPI_DEFAULT_XFER_BUF_SIZE);
+ if (error)
+ return error;

/*
* Setting the page to zero will (a) make sure the PSR is in a
* known state, and (b) make sure we can talk to the device.
*/
- retval = rmi_set_page(rmi_spi, 0);
- if (retval) {
+ error = rmi_set_page(rmi_spi, 0);
+ if (error) {
dev_err(&spi->dev, "Failed to set page select to 0.\n");
- return retval;
+ return error;
}

- retval = rmi_register_transport_device(&rmi_spi->xport);
- if (retval) {
- dev_err(&spi->dev, "failed to register transport.\n");
- return retval;
+ dev_info(&spi->dev, "registering SPI-connected sensor\n");
+
+ error = rmi_register_transport_device(&rmi_spi->xport);
+ if (error) {
+ dev_err(&spi->dev, "failed to register sensor: %d\n", error);
+ return error;
}
- retval = devm_add_action_or_reset(&spi->dev,
+
+ error = devm_add_action_or_reset(&spi->dev,
rmi_spi_unregister_transport,
rmi_spi);
- if (retval)
- return retval;
+ if (error)
+ return error;

- dev_info(&spi->dev, "registered RMI SPI driver\n");
return 0;
}

--
2.12.1.578.ge9c3154ca4-goog
\
 
 \ /
  Last update: 2017-03-25 07:01    [W:0.055 / U:0.236 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site