lkml.org 
[lkml]   [2017]   [Mar]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 6/9] Input: psmouse - add support for SMBus companions
On Mon, Mar 13, 2017 at 11:31:48AM +0100, Benjamin Tissoires wrote:
> On Mar 10 2017 or thereabouts, Dmitry Torokhov wrote:
> > From: Benjamin Tissoires <benjamin.tissoires@redhat.com>
> >
> > This provides glue between PS/2 devices that enumerate the RMI4 devices
> > and Elan touchpads to the RMI4 (or Elan) SMBus driver.
> >
> > The SMBus devices keep their PS/2 connection alive. If the initialization
> > process goes too far (psmouse_activate called), the device disconnects
> > from the I2C bus and stays on the PS/2 bus, that is why we explicitly
> > disable PS/2 device reporting (by calling psmouse_deactivate) before
> > trying to register SMBus companion device.
> >
> > The HID over I2C devices are enumerated through the ACPI DSDT, and
> > their PS/2 device also exports the InterTouch bit in the extended
> > capability 0x0C. However, the firmware keeps its I2C connection open
> > even after going further in the PS/2 initialization. We don't need
> > to take extra precautions with those device, especially because they
> > block their PS/2 communication when HID over I2C is used.
> >
> > Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
> > Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
> > ---
> > drivers/input/mouse/Kconfig | 4 +
> > drivers/input/mouse/Makefile | 2 +
> > drivers/input/mouse/psmouse-base.c | 16 +-
> > drivers/input/mouse/psmouse-smbus.c | 291 ++++++++++++++++++++++++++++++++++++
> > drivers/input/mouse/psmouse.h | 37 +++++
> > 5 files changed, 348 insertions(+), 2 deletions(-)
> > create mode 100644 drivers/input/mouse/psmouse-smbus.c
> >
> > diff --git a/drivers/input/mouse/Kconfig b/drivers/input/mouse/Kconfig
> > index 096abb4ad5cd..87bde8a210c7 100644
> > --- a/drivers/input/mouse/Kconfig
> > +++ b/drivers/input/mouse/Kconfig
> > @@ -171,6 +171,10 @@ config MOUSE_PS2_VMMOUSE
> >
> > If unsure, say N.
> >
> > +config MOUSE_PS2_SMBUS
> > + bool
> > + depends on MOUSE_PS2
> > +
> > config MOUSE_SERIAL
> > tristate "Serial mouse"
> > select SERIO
> > diff --git a/drivers/input/mouse/Makefile b/drivers/input/mouse/Makefile
> > index 6168b134937b..56bf0ad877c6 100644
> > --- a/drivers/input/mouse/Makefile
> > +++ b/drivers/input/mouse/Makefile
> > @@ -39,6 +39,8 @@ psmouse-$(CONFIG_MOUSE_PS2_TOUCHKIT) += touchkit_ps2.o
> > psmouse-$(CONFIG_MOUSE_PS2_CYPRESS) += cypress_ps2.o
> > psmouse-$(CONFIG_MOUSE_PS2_VMMOUSE) += vmmouse.o
> >
> > +psmouse-$(CONFIG_MOUSE_PS2_SMBUS) += psmouse-smbus.o
> > +
> > elan_i2c-objs := elan_i2c_core.o
> > elan_i2c-$(CONFIG_MOUSE_ELAN_I2C_I2C) += elan_i2c_i2c.o
> > elan_i2c-$(CONFIG_MOUSE_ELAN_I2C_SMBUS) += elan_i2c_smbus.o
> > diff --git a/drivers/input/mouse/psmouse-base.c b/drivers/input/mouse/psmouse-base.c
> > index 40f09ce84f14..bdb48b2acc57 100644
> > --- a/drivers/input/mouse/psmouse-base.c
> > +++ b/drivers/input/mouse/psmouse-base.c
> > @@ -1996,16 +1996,27 @@ static int __init psmouse_init(void)
> > synaptics_module_init();
> > hgpk_module_init();
> >
> > + err = psmouse_smbus_module_init();
> > + if (err)
> > + return err;
> > +
> > kpsmoused_wq = alloc_ordered_workqueue("kpsmoused", 0);
> > if (!kpsmoused_wq) {
> > pr_err("failed to create kpsmoused workqueue\n");
> > - return -ENOMEM;
> > + err = -ENOMEM;
> > + goto err_smbus_exit;
> > }
> >
> > err = serio_register_driver(&psmouse_drv);
> > if (err)
> > - destroy_workqueue(kpsmoused_wq);
> > + goto err_destroy_wq;
> >
> > + return 0;
> > +
> > +err_destroy_wq:
> > + destroy_workqueue(kpsmoused_wq);
> > +err_smbus_exit:
> > + psmouse_smbus_module_exit();
> > return err;
> > }
> >
> > @@ -2013,6 +2024,7 @@ static void __exit psmouse_exit(void)
> > {
> > serio_unregister_driver(&psmouse_drv);
> > destroy_workqueue(kpsmoused_wq);
> > + psmouse_smbus_module_exit();
> > }
> >
> > module_init(psmouse_init);
> > diff --git a/drivers/input/mouse/psmouse-smbus.c b/drivers/input/mouse/psmouse-smbus.c
> > new file mode 100644
> > index 000000000000..cc716977fbf9
> > --- /dev/null
> > +++ b/drivers/input/mouse/psmouse-smbus.c
> > @@ -0,0 +1,291 @@
> > +/*
> > + * Copyright (c) 2017 Red Hat, Inc
> > + *
> > + * This program is free software; you can redistribute it and/or modify it
> > + * under the terms of the GNU General Public License version 2 as published by
> > + * the Free Software Foundation.
> > + */
> > +
> > +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
> > +
> > +#include <linux/kernel.h>
> > +#include <linux/module.h>
> > +#include <linux/libps2.h>
> > +#include <linux/i2c.h>
> > +#include <linux/serio.h>
> > +#include <linux/slab.h>
> > +#include <linux/workqueue.h>
> > +#include "psmouse.h"
> > +
> > +struct psmouse_smbus_dev {
> > + struct i2c_board_info board;
> > + struct psmouse *psmouse;
> > + struct i2c_client *client;
> > + struct list_head node;
> > + bool dead;
> > +};
> > +
> > +static LIST_HEAD(psmouse_smbus_list);
> > +static DEFINE_MUTEX(psmouse_smbus_mutex);
> > +
> > +static void psmouse_smbus_check_adapter(struct i2c_adapter *adapter)
> > +{
> > + struct psmouse_smbus_dev *smbdev;
> > +
> > + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_HOST_NOTIFY))
> > + return;
> > +
> > + mutex_lock(&psmouse_smbus_mutex);
> > +
> > + list_for_each_entry(smbdev, &psmouse_smbus_list, node) {
> > + if (smbdev->dead)
> > + continue;
> > +
> > + if (smbdev->client)
> > + continue;
> > +
> > + if (i2c_probe_func_quick_read(adapter, smbdev->board.addr) < 0)
> > + continue;
>
> These 2 lines above seem to be the culprit of the
> non-working-on-the-t450s-while-in-bzImage :)
>
> First, i2c_probe_func_quick_read() returns a boolean, so the value can
> never be negative. And second, if you try to probe the device on the I2C
> bus while psmouse_activate has been called, the device won't answer. So
> we can simply ignore the call all together and let i2c_new_probed_device()
> checks for the validity of the device.
>
> Bonus point, if I remove the call to i2c_probe_func_quick_read(), I seem
> to have reliable detection of SMBus even when psmouse in compiled in the
> bzImage.

Yeah, this is a bit unfortunate, but I think we'll have to live with it.
I tried adding calls to psmouse_disable and try different probe
routines, but the device keeps hiding if we went past psmouse_activate,
and haven't gone through entire reset/detect sequence again.

So I guess if we see an adapter that is host notify capable and we have
our "breadcrumb" we will be issuing rescan request and hope for the
best. We do not really expect many such adapters and many companions in
a single system.

Thanks.

--
Dmitry

\
 
 \ /
  Last update: 2017-03-20 01:21    [W:0.075 / U:0.868 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site