lkml.org 
[lkml]   [2017]   [Mar]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Date
Subject[GIT PULL] device-dax fixes for 4.11-rc3
Hi Linus, please pull from:

git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm libnvdimm-fixes

...to receive 2 fixes and a cleanup for device-dax.

The device-dax driver was not being careful to handle falling back to
smaller fault-granularity sizes. The driver already fails fault
attempts that are smaller than the device's alignment, but it also
needs to handle the cases where a larger page mapping could be
established. For simplicity of the immediate fix the implementation
just signals VM_FAULT_FALLBACK until fault-size == device-alignment.
One fix is for -stable to address pmd-to-pte fallback from the
original implementation, another fix is for the new (introduced in
4.11-rc1) pud-to-pmd regression, and a typo fix comes along for the
ride. These have received a build success notification from the kbuild
robot.

The following changes since commit c1ae3cfa0e89fa1a7ecc4c99031f5e9ae99d9201:

Linux 4.11-rc1 (2017-03-05 12:59:56 -0800)

are available in the git repository at:

git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm libnvdimm-fixes

for you to fetch changes up to 52084f89b38cdd896b59627c629915ef1a7bf615:

device-dax: fix debug output typo (2017-03-10 19:56:56 -0800)

----------------------------------------------------------------
Dave Jiang (3):
device-dax: fix pmd/pte fault fallback handling
device-dax: fix pud fault fallback handling
device-dax: fix debug output typo

drivers/dax/dax.c | 33 ++++++++++++++++++++++++++++++---
1 file changed, 30 insertions(+), 3 deletions(-)

---

commit 0134ed4fb9e78672ee9f7b18007114404c81e63f
Author: Dave Jiang <dave.jiang@intel.com>
Date: Fri Mar 10 13:24:22 2017 -0700

device-dax: fix pmd/pte fault fallback handling

Jeff Moyer reports:

With a device dax alignment of 4KB or 2MB, I get sigbus when running
the attached fio job file for the current kernel (4.11.0-rc1+). If
I specify an alignment of 1GB, it works.

I turned on debug output, and saw that it was failing in the huge
fault code.

dax dax1.0: dax_open
dax dax1.0: dax_mmap
dax dax1.0: dax_dev_huge_fault: fio: write (0x7f08f0a00000 -
dax dax1.0: __dax_dev_pud_fault: phys_to_pgoff(0xffffffffcf60
dax dax1.0: dax_release

fio config for reproduce:
[global]
ioengine=dev-dax
direct=0
filename=/dev/dax0.0
bs=2m

[write]
rw=write

[read]
stonewall
rw=read

The driver fails to fallback when taking a fault that is larger than
the device alignment, or handling a larger fault when a smaller
mapping is already established. While we could support larger
mappings for a device with a smaller alignment, that change is
too large for the immediate fix. The simplest change is to force
fallback until the fault size matches the alignment.

Fixes: dee410792419 ("/dev/dax, core: file operations and dax-mmap")
Cc: <stable@vger.kernel.org>
Reported-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

commit 70b085b06c4560a69e95607f77bb4c2b2e41943c
Author: Dave Jiang <dave.jiang@intel.com>
Date: Fri Mar 10 13:24:27 2017 -0700

device-dax: fix pud fault fallback handling

Jeff Moyer reports:

With a device dax alignment of 4KB or 2MB, I get sigbus when running
the attached fio job file for the current kernel (4.11.0-rc1+). If
I specify an alignment of 1GB, it works.

I turned on debug output, and saw that it was failing in the huge
fault code.

dax dax1.0: dax_open
dax dax1.0: dax_mmap
dax dax1.0: dax_dev_huge_fault: fio: write (0x7f08f0a00000 -
dax dax1.0: __dax_dev_pud_fault: phys_to_pgoff(0xffffffffcf60)
dax dax1.0: dax_release

fio config for reproduce:
[global]
ioengine=dev-dax
direct=0
filename=/dev/dax0.0
bs=2m

[write]
rw=write

[read]
stonewall
rw=read

The driver fails to fallback when taking a fault that is larger than
the device alignment, or handling a larger fault when a smaller
mapping is already established. While we could support larger
mappings for a device with a smaller alignment, that change is
too large for the immediate fix. The simplest change is to force
fallback until the fault size matches the alignment.

Reported-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

commit 52084f89b38cdd896b59627c629915ef1a7bf615
Author: Dave Jiang <dave.jiang@intel.com>
Date: Thu Mar 9 16:56:01 2017 -0700

device-dax: fix debug output typo

The debug output for return the return data of pgoff_to_phys() in the
fault handlers has 'phys' and 'pgoff' incorrectly swapped.

Reported-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

diff --git a/drivers/dax/dax.c b/drivers/dax/dax.c
index 8d9829ff2a78..80c6db279ae1 100644
--- a/drivers/dax/dax.c
+++ b/drivers/dax/dax.c
@@ -427,6 +427,7 @@ static int __dax_dev_pte_fault(struct dax_dev
*dax_dev, struct vm_fault *vmf)
int rc = VM_FAULT_SIGBUS;
phys_addr_t phys;
pfn_t pfn;
+ unsigned int fault_size = PAGE_SIZE;

if (check_vma(dax_dev, vmf->vma, __func__))
return VM_FAULT_SIGBUS;
@@ -437,9 +438,12 @@ static int __dax_dev_pte_fault(struct dax_dev
*dax_dev, struct vm_fault *vmf)
return VM_FAULT_SIGBUS;
}

+ if (fault_size != dax_region->align)
+ return VM_FAULT_SIGBUS;
+
phys = pgoff_to_phys(dax_dev, vmf->pgoff, PAGE_SIZE);
if (phys == -1) {
- dev_dbg(dev, "%s: phys_to_pgoff(%#lx) failed\n", __func__,
+ dev_dbg(dev, "%s: pgoff_to_phys(%#lx) failed\n", __func__,
vmf->pgoff);
return VM_FAULT_SIGBUS;
}
@@ -464,6 +468,7 @@ static int __dax_dev_pmd_fault(struct dax_dev
*dax_dev, struct vm_fault *vmf)
phys_addr_t phys;
pgoff_t pgoff;
pfn_t pfn;
+ unsigned int fault_size = PMD_SIZE;

if (check_vma(dax_dev, vmf->vma, __func__))
return VM_FAULT_SIGBUS;
@@ -480,10 +485,20 @@ static int __dax_dev_pmd_fault(struct dax_dev
*dax_dev, struct vm_fault *vmf)
return VM_FAULT_SIGBUS;
}

+ if (fault_size < dax_region->align)
+ return VM_FAULT_SIGBUS;
+ else if (fault_size > dax_region->align)
+ return VM_FAULT_FALLBACK;
+
+ /* if we are outside of the VMA */
+ if (pmd_addr < vmf->vma->vm_start ||
+ (pmd_addr + PMD_SIZE) > vmf->vma->vm_end)
+ return VM_FAULT_SIGBUS;
+
pgoff = linear_page_index(vmf->vma, pmd_addr);
phys = pgoff_to_phys(dax_dev, pgoff, PMD_SIZE);
: if (phys == -1) {
- dev_dbg(dev, "%s: phys_to_pgoff(%#lx) failed\n", __func__,
+ dev_dbg(dev, "%s: pgoff_to_phys(%#lx) failed\n", __func__,
pgoff);
return VM_FAULT_SIGBUS;
}
@@ -503,6 +518,8 @@ static int __dax_dev_pud_fault(struct dax_dev
*dax_dev, struct vm_fault *vmf)
phys_addr_t phys;
pgoff_t pgoff;
pfn_t pfn;
+ unsigned int fault_size = PUD_SIZE;
+

if (check_vma(dax_dev, vmf->vma, __func__))
return VM_FAULT_SIGBUS;
@@ -519,10 +536,20 @@ static int __dax_dev_pud_fault(struct dax_dev
*dax_dev, struct vm_fault *vmf)
return VM_FAULT_SIGBUS;
}

+ if (fault_size < dax_region->align)
+ return VM_FAULT_SIGBUS;
+ else if (fault_size > dax_region->align)
+ return VM_FAULT_FALLBACK;
+
+ /* if we are outside of the VMA */
+ if (pud_addr < vmf->vma->vm_start ||
+ (pud_addr + PUD_SIZE) > vmf->vma->vm_end)
+ return VM_FAULT_SIGBUS;
+
pgoff = linear_page_index(vmf->vma, pud_addr);
phys = pgoff_to_phys(dax_dev, pgoff, PUD_SIZE);
if (phys == -1) {
- dev_dbg(dev, "%s: phys_to_pgoff(%#lx) failed\n", __func__,
+ dev_dbg(dev, "%s: pgoff_to_phys(%#lx) failed\n", __func__,
pgoff);
return VM_FAULT_SIGBUS;
}
\
 
 \ /
  Last update: 2017-03-18 18:00    [W:0.042 / U:26.020 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site