lkml.org 
[lkml]   [2017]   [Mar]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 4/4] mvebu: wrt1900ac: Use pwm-fan rather than gpio-fan
Date
From: Andrew Lunn <andrew@lunn.ch>

The mvebu gpio driver can also perform PWM on some pins. Us the pwm-fan
driver to control the fan of the WRT1900AC, giving us finer grained
control over its speed and hence noise.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
URL: https://patchwork.ozlabs.org/patch/427291/
Signed-off-by: Ralph Sennhauser <ralph.sennhauser@gmail.com>
---
arch/arm/boot/dts/armada-xp-linksys-mamba.dts | 8 +++-----
1 file changed, 3 insertions(+), 5 deletions(-)

diff --git a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
index 3744ba3..836b275e 100644
--- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
+++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
@@ -293,13 +293,11 @@
};
};

- gpio_fan {
+ pwm_fan {
/* SUNON HA4010V4-0000-C99 */
- compatible = "gpio-fan";
- gpios = <&gpio0 24 0>;

- gpio-fan,speed-map = <0 0
- 4500 1>;
+ compatible = "pwm-fan";
+ pwms = <&gpio0 24 4000 0>;
};

dsa {
--
2.10.2
\
 
 \ /
  Last update: 2017-03-18 16:53    [W:0.107 / U:0.188 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site