[lkml]   [2017]   [Mar]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject[PATCH v5 0/2] mmc: host: s3cmci: add device tree support
This series adds support for configuring Samsung's S3C24XX MMC/SD/SDIO
controller via device tree.

Tested on FriendlyARM mini2440, based on s3c2440 SoC.

Changes since v4 (as suggested by Jaehoon Chung):
- using just a flag as a data structure for the driver to check for
s3c2400 compatibility

Changes since v3 (as suggested by Rob Herring):
- describing properties that wasn't documented and removing unnecessary
comment in the device tree binding

Changes since v2:
- struct "s3cmci_drv_data" and flag "is2440" renamed
- copying the whole driver data struct instead of only its member so
it will be easier to extend the information in the future
- using mmc_of_parse() to read "cd-gpios" and "wp-gpios" properties
from device tree

Changes since v1:
- pinctrl description removed from DT binding
- unit and label on DT binding renamed to mmc

Sergio Prado (2):
dt-bindings: mmc: add DT binding for S3C24XX MMC/SD/SDIO controller
mmc: host: s3cmci: allow probing from device tree

.../devicetree/bindings/mmc/samsung,s3cmci.txt | 42 ++++
drivers/mmc/host/s3cmci.c | 257 ++++++++++-----------
2 files changed, 168 insertions(+), 131 deletions(-)
create mode 100644 Documentation/devicetree/bindings/mmc/samsung,s3cmci.txt


 \ /
  Last update: 2017-03-18 02:15    [W:0.070 / U:0.684 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site