lkml.org 
[lkml]   [2017]   [Mar]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/7] ARM: OMAP5: Thermal: Add slope and offset values
Date
Currently the slope and offset values for calculating the
hot spot temperature of a particular thermal zone is part
of driver data. Pass them here instead and obtain the values
while of node parsing.

Signed-off-by: Keerthy <j-keerthy@ti.com>
---
arch/arm/boot/dts/omap5.dtsi | 9 +++++++++
1 file changed, 9 insertions(+)

diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index 222155c..eaff2a5 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -1127,6 +1127,15 @@

&cpu_thermal {
polling-delay = <500>; /* milliseconds */
+ coefficients = <65 (-1791)>;
};

/include/ "omap54xx-clocks.dtsi"
+
+&gpu_thermal {
+ coefficients = <117 (-2992)>;
+};
+
+&core_thermal {
+ coefficients = <0 2000>;
+};
--
1.9.1
\
 
 \ /
  Last update: 2017-03-01 11:36    [W:0.161 / U:0.908 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site