Messages in this thread Patch in this message | | | From | Rask Ingemann Lambertsen <> | Date | Sun, 22 Jan 2017 18:33:10 +0100 | Subject | [PATCH v2 4/5] regulator: axp20x: Add support for the AXP808 PMIC |
| |
The regulators are the same as on the AXP806.
Signed-off-by: Rask Ingemann Lambertsen <rask@formelder.dk> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Chen-Yu Tsai <wens@csie.org> ---
No changes in v2.
drivers/regulator/axp20x-regulator.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/drivers/regulator/axp20x-regulator.c b/drivers/regulator/axp20x-regulator.c index a3ade9e..034dce8 100644 --- a/drivers/regulator/axp20x-regulator.c +++ b/drivers/regulator/axp20x-regulator.c @@ -370,6 +370,7 @@ static int axp20x_set_dcdc_freq(struct platform_device *pdev, u32 dcdcfreq) step = 75; break; case AXP806_ID: + case AXP808_ID: /* * AXP806 DCDC work frequency setting has the same range and * step as AXP22X, but at a different register. @@ -459,6 +460,7 @@ static int axp20x_set_dcdc_workmode(struct regulator_dev *rdev, int id, u32 work break; case AXP806_ID: + case AXP808_ID: reg = AXP806_DCDC_MODE_CTRL2; /* * AXP806 DCDC regulator IDs have the same range as AXP22X. @@ -492,8 +494,8 @@ static bool axp20x_is_polyphase_slave(struct axp20x_dev *axp20x, int id) { u32 reg = 0; - /* Only AXP806 has poly-phase outputs */ - if (axp20x->variant != AXP806_ID) + /* Only AXP806 and AXP808 have poly-phase outputs */ + if (axp20x->variant != AXP806_ID && axp20x->variant != AXP808_ID) return false; regmap_read(axp20x->regmap, AXP806_DCDC_MODE_CTRL2, ®); @@ -541,6 +543,7 @@ static int axp20x_regulator_probe(struct platform_device *pdev) "x-powers,drive-vbus-en"); break; case AXP806_ID: + case AXP808_ID: regulators = axp806_regulators; nregulators = AXP806_REG_ID_MAX; break; -- 2.10.2
| |