lkml.org 
[lkml]   [2017]   [Feb]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    From
    SubjectRe: [PATCH 6/8] arm64: dts: allwinner: add device node for R_PWM
    On Wed, Feb 08, 2017 at 06:00:07PM +0800, Icenowy Zheng wrote:
    > Allwinner A64 SoC has two PWM controller, both are similar to the
    > controller in H3 SoC.
    >
    > Add one of the controllers which lies in the "CPUs" part of the SoC.
    >
    > Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
    > ---
    > arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 8 ++++++++
    > 1 file changed, 8 insertions(+)
    >
    > diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
    > index 4b0baa79554c..6204aee5c6f4 100644
    > --- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
    > +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
    > @@ -432,5 +432,13 @@
    > #size-cells = <0>;
    > #gpio-cells = <3>;
    > };
    > +
    > + r_pwm: pwm@01f03800 {
    > + compatible = "allwinner,sun8i-h3-pwm";

    Please add an a64 compatible there too.

    > + reg = <0x01f03800 0x8>;

    The size is 0x400

    Thanks,
    Maxime

    --
    Maxime Ripard, Free Electrons
    Embedded Linux and Kernel engineering
    http://free-electrons.com
    [unhandled content-type:application/pgp-signature]
    \
     
     \ /
      Last update: 2017-02-08 12:20    [W:4.038 / U:0.276 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site