lkml.org 
[lkml]   [2017]   [Feb]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 14/22] dt-bindings: PCI: dra7xx: Add dt bindings to enable legacy mode
Date
Update device tree binding documentation of TI's dra7xx PCI
controller to include property for enabling legacy mode.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
Documentation/devicetree/bindings/pci/ti-pci.txt | 4 ++++
1 file changed, 4 insertions(+)

diff --git a/Documentation/devicetree/bindings/pci/ti-pci.txt b/Documentation/devicetree/bindings/pci/ti-pci.txt
index 190828a..72ebe2b 100644
--- a/Documentation/devicetree/bindings/pci/ti-pci.txt
+++ b/Documentation/devicetree/bindings/pci/ti-pci.txt
@@ -39,6 +39,10 @@ DEVICE MODE
- interrupts : one interrupt entries must be specified for main interrupt.
- num-ib-windows : number of inbound address translation windows
- num-ob-windows : number of outbound address translation windows
+ - syscon-legacy-mode: phandle to the syscon dt node. The 1st argument should
+ contain the register offset within syscon and the 2nd
+ argument should contain the bit field for setting the
+ legacy mode

Optional Property:
- gpios : Should be added if a gpio line is required to drive PERST# line
--
1.7.9.5
\
 
 \ /
  Last update: 2017-02-17 11:00    [W:0.404 / U:0.060 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site