lkml.org 
[lkml]   [2017]   [Feb]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4 6/7] dt-bindings: Add Multi-Inno MI0283QT binding
Date
Add device-tree binding documentation for the MI0283QT display panel.

Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Rob Herring <robh@kernel.org>
---
.../bindings/display/multi-inno,mi0283qt.txt | 27 ++++++++++++++++++++++
1 file changed, 27 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/multi-inno,mi0283qt.txt

diff --git a/Documentation/devicetree/bindings/display/multi-inno,mi0283qt.txt b/Documentation/devicetree/bindings/display/multi-inno,mi0283qt.txt
new file mode 100644
index 0000000..eed48c3
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/multi-inno,mi0283qt.txt
@@ -0,0 +1,27 @@
+Multi-Inno MI0283QT display panel
+
+Required properties:
+- compatible: "multi-inno,mi0283qt".
+
+The node for this driver must be a child node of a SPI controller, hence
+all mandatory properties described in ../spi/spi-bus.txt must be specified.
+
+Optional properties:
+- dc-gpios: D/C pin. The presence/absence of this GPIO determines
+ the panel interface mode (IM[3:0] pins):
+ - present: IM=x110 4-wire 8-bit data serial interface
+ - absent: IM=x101 3-wire 9-bit data serial interface
+- reset-gpios: Reset pin
+- power-supply: A regulator node for the supply voltage.
+- backlight: phandle of the backlight device attached to the panel
+- rotation: panel rotation in degrees counter clockwise (0,90,180,270)
+
+Example:
+ mi0283qt@0{
+ compatible = "multi-inno,mi0283qt";
+ reg = <0>;
+ spi-max-frequency = <32000000>;
+ rotation = <90>;
+ dc-gpios = <&gpio 25 0>;
+ backlight = <&backlight>;
+ };
--
2.10.2
\
 
 \ /
  Last update: 2017-02-11 19:50    [W:0.136 / U:4.792 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site