Messages in this thread Patch in this message | | | From | tyler@opensour ... | Subject | [PATCH v1 5/6] ARM: dts: imx7d-sbc-iot: enable PCIe peripheral | Date | Tue, 5 Dec 2017 14:27:06 -0800 |
| |
From: Tyler Baker <tyler@opensourcefoundries.com>
Add a PCIe device tree node to enable PCIe support.
Signed-off-by: Tyler Baker <tyler@opensourcefoundries.com> --- arch/arm/boot/dts/imx7d-sbc-iot-imx7.dts | 13 +++++++++++++ 1 file changed, 13 insertions(+)
diff --git a/arch/arm/boot/dts/imx7d-sbc-iot-imx7.dts b/arch/arm/boot/dts/imx7d-sbc-iot-imx7.dts index 67aa4b7..7f45fa2 100644 --- a/arch/arm/boot/dts/imx7d-sbc-iot-imx7.dts +++ b/arch/arm/boot/dts/imx7d-sbc-iot-imx7.dts @@ -79,6 +79,12 @@ >; }; + pinctrl_pcie: pciegrp { + fsl,pins = < + MX7D_PAD_EPDC_BDR1__GPIO2_IO29 0x34 /* PCIe RST */ + >; + }; + pinctrl_uart2: uart2grp { fsl,pins = < MX7D_PAD_LCD_ENABLE__UART2_DCE_TX 0x79 /* P7-12 */ @@ -119,6 +125,13 @@ }; }; +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie>; + reset-gpio = <&gpio2 29 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + &uart2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart2>; -- 2.9.3
| |