lkml.org 
[lkml]   [2017]   [Dec]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v8 01/13] Documentation: Add SLIMbus summary
From
Date
Thanks for the review comments.

On 01/12/17 10:27, Jonathan Neuschäfer wrote:
> Hi, some small nits below.
>
> On Thu, Nov 30, 2017 at 05:41:48PM +0000, srinivas.kandagatla@linaro.org wrote:
>> From: Sagar Dharia <sdharia@codeaurora.org>
>>
>> SLIMbus (Serial Low Power Interchip Media Bus) is a specification
>> developed by MIPI (Mobile Industry Processor Interface) alliance.
>> SLIMbus is a 2-wire implementation, which is used to communicate with
>> peripheral components like audio-codec.
>>
>> The summary of SLIMbus and API is documented in the 'summary' file.
>>
>> Signed-off-by: Sagar Dharia <sdharia@codeaurora.org>
>> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
>> ---
>> Documentation/driver-api/slimbus/index.rst | 15 ++++
>> Documentation/driver-api/slimbus/summary.rst | 108 +++++++++++++++++++++++++++
>> 2 files changed, 123 insertions(+)
>> create mode 100644 Documentation/driver-api/slimbus/index.rst
>> create mode 100644 Documentation/driver-api/slimbus/summary.rst
>
> It would probably make sense to Cc the documentation maintainers/mailing
> list on this patch (AFAICS, you didn't do that).
>
Yep, I will include them while sending next version.

> When do you plan to add slimbus to Documentation/driver-api/index.rst?

that's good point, I will fix this in next version.
>

>> +framework allows drivers to bind when corresponding devices report their
>> +presence on the bus.
>> +However, it is possible that the driver needs to be probed
>> +first so that it can enable corresponding SLIMbus device (e.g. power it up and/or
>> +take it out of reset). To support that behavior, the framework allows drivers
>> +to probe first as well (e.g. using standard DeviceTree compatbility field).
>
> Typo: s/compatbility/compatibility/
Yep, Will fix in next version.

>
>> +---------------
>> +The framework supports APIs to exchange control-information with a SLIMbus
>> +device. APIs can be synchronous or asynchronous.
>> +From controller's perspective, multiple buffers can be queued to/from
>> +hardware for sending/receiving data using slim_ctrl_buf circular buffer.
>> +The header file <linux/slimbus.h> has more documentation about messaging APIs.
>
> Once the kerneldoc documentation (i.e. the /** ... */ comments in the
> source) is included somewhere, I think it would make sense to make
> slim_ctrl_buf a clickable link to the struct's documentation.
Sure, I will explore this side of it before i send next version.

thanks,
srini
>
>
> Thanks,
> Jonathan Neuschäfer
>

\
 
 \ /
  Last update: 2017-12-05 23:02    [W:0.045 / U:3.888 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site