lkml.org 
[lkml]   [2017]   [Dec]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCHv2 0/2] mtd: m25p80: restore the addressing mode when stop using the flash
From
Date
Hi Hou,

Le 05/12/2017 à 06:33, Zhiqiang Hou a écrit :
> From: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
>
> To be compatible with legacy device, reset the addressing mode
> to the default mode. Such as Freescale eSPI boot, it copies the
> images from SPI flash without firing a reset signal previously,
> so the reboot command will fail without reseting the addressing
> mode of SPI flash.
>

You should put this in one of the commit messages so it explains which
issue is fixed by your patches.

Otherwise, your series looks good to me :)

Best regards,

Cyrille

> Hou Zhiqiang (2):
> mtd: spi-nor: add an API to restore the status of SPI flash chip
> mtd: m25p80: restore the status of SPI flash when stop using it
>
> Documentation/mtd/spi-nor.txt | 3 +++
> drivers/mtd/devices/m25p80.c | 9 +++++++++
> drivers/mtd/spi-nor/spi-nor.c | 10 ++++++++++
> include/linux/mtd/spi-nor.h | 6 ++++++
> 4 files changed, 28 insertions(+)
>

\
 
 \ /
  Last update: 2017-12-05 21:41    [W:0.046 / U:0.284 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site