lkml.org 
[lkml]   [2017]   [Dec]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 1/2] PCI: dra7xx: Fix legacy INTD IRQ handling
Date
Legacy INTD IRQ handling is broken on dra7xx due to fact that driver
uses hwirq in range of 1-4 for INTA, INTD whereas IRQ domain is of size
4 which is numbered 0-3. Therefore when INTD IRQ line is used with
pci-dra7xx driver following warning is seen:

WARNING: CPU: 0 PID: 1 at kernel/irq/irqdomain.c:342 irq_domain_associate+0x12c/0x1c4
error: hwirq 0x4 is too large for dummy

Fix this by using pci_irqd_intx_xlate() helper to translate the INTx 1-4
range into the 0-3 as done in other PCIe drivers.

Suggested-by: Bjorn Helgaas <bhelgaas@google.com>
Reported-by: Chris Welch <Chris.Welch@viavisolutions.com>
Signed-off-by: Vignesh R <vigneshr@ti.com>
---
drivers/pci/dwc/pci-dra7xx.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/pci/dwc/pci-dra7xx.c b/drivers/pci/dwc/pci-dra7xx.c
index 58aed0896468..892f93910012 100644
--- a/drivers/pci/dwc/pci-dra7xx.c
+++ b/drivers/pci/dwc/pci-dra7xx.c
@@ -226,6 +226,7 @@ static int dra7xx_pcie_intx_map(struct irq_domain *domain, unsigned int irq,

static const struct irq_domain_ops intx_domain_ops = {
.map = dra7xx_pcie_intx_map,
+ .xlate = pci_irqd_intx_xlate,
};

static int dra7xx_pcie_init_irq_domain(struct pcie_port *pp)
@@ -269,7 +270,7 @@ static irqreturn_t dra7xx_pcie_msi_irq_handler(int irq, void *arg)
case INTC:
case INTD:
generic_handle_irq(irq_find_mapping(dra7xx->irq_domain,
- ffs(reg)));
+ ffs(reg) - 1));
break;
}

--
2.15.1
\
 
 \ /
  Last update: 2017-12-29 12:55    [W:0.102 / U:0.436 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site