lkml.org 
[lkml]   [2017]   [Dec]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4.9 099/104] thermal/drivers/hisi: Fix kernel panic on alarm interrupt
Date
4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Daniel Lezcano <daniel.lezcano@linaro.org>

commit 2cb4de785c40d4a2132cfc13e63828f5a28c3351 upstream.

The threaded interrupt for the alarm interrupt is requested before the
temperature controller is setup. This one can fire an interrupt immediately
leading to a kernel panic as the sensor data is not initialized.

In order to prevent that, move the threaded irq after the Tsensor is setup.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Tested-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
Signed-off-by: Kevin Wangtao <kevin.wangtao@hisilicon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
drivers/thermal/hisi_thermal.c | 18 +++++++++---------
1 file changed, 9 insertions(+), 9 deletions(-)

--- a/drivers/thermal/hisi_thermal.c
+++ b/drivers/thermal/hisi_thermal.c
@@ -317,15 +317,6 @@ static int hisi_thermal_probe(struct pla
if (data->irq < 0)
return data->irq;

- ret = devm_request_threaded_irq(&pdev->dev, data->irq,
- hisi_thermal_alarm_irq,
- hisi_thermal_alarm_irq_thread,
- 0, "hisi_thermal", data);
- if (ret < 0) {
- dev_err(&pdev->dev, "failed to request alarm irq: %d\n", ret);
- return ret;
- }
-
platform_set_drvdata(pdev, data);

data->clk = devm_clk_get(&pdev->dev, "thermal_clk");
@@ -357,6 +348,15 @@ static int hisi_thermal_probe(struct pla
hisi_thermal_toggle_sensor(&data->sensors[i], true);
}

+ ret = devm_request_threaded_irq(&pdev->dev, data->irq,
+ hisi_thermal_alarm_irq,
+ hisi_thermal_alarm_irq_thread,
+ 0, "hisi_thermal", data);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "failed to request alarm irq: %d\n", ret);
+ return ret;
+ }
+
enable_irq(data->irq);

return 0;

\
 
 \ /
  Last update: 2017-12-22 11:07    [W:1.027 / U:0.160 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site