lkml.org 
[lkml]   [2017]   [Dec]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH] PCI: Mediatek: clear irq status after irq dispathed to avoid reentry
[+cc Lorenzo, please cc him on all drivers/{host,dwc,endpoint} material]

Please run "git log --oneline drivers/pci/host/pcie-mediatek.c" and
make yours match. Same capitalization, same sentence structure, etc.,
e.g.,

PCI: mediatek: Clear IRQ status ...

s/dispathed/dispatched/

s/irq/IRQ/ in the summary and all the English text below.

On Wed, Dec 20, 2017 at 10:52:14AM +0800, honghui.zhang@mediatek.com wrote:
> From: Honghui Zhang <honghui.zhang@mediatek.com>
>
> There maybe a same irq reentry scenario after irq received in current
> irq handle flow:
> EP device PCIe host driver EP driver
> 1. issue an irq
> 2. received irq
> 3. clear irq status
> 4. dispatch irq
> 5. clear irq source
> The irq status was not successfully cleared at step 2 since the irq
> source was not cleared yet. So the PCIe host driver may receive the
> same irq after step 5. Then there's an irq reentry occurred.
> Even worse, if the reentry irq was not an irq that EP driver expected,
> it may not handle the irq. Then we may run into the dead loop from

By "dead loop" I assume you mean "infinite loop"? I don't think it's
a deadlock since nothing is waiting.

> step 2 to step 4.
> Clear the irq status after irq have been dispatched to avoid the irq
> reentry.
>
> Signed-off-by: Honghui Zhang <honghui.zhang@mediatek.com>
> ---
> drivers/pci/host/pcie-mediatek.c | 8 ++++----
> 1 file changed, 4 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/pci/host/pcie-mediatek.c b/drivers/pci/host/pcie-mediatek.c
> index db93efd..3248771 100644
> --- a/drivers/pci/host/pcie-mediatek.c
> +++ b/drivers/pci/host/pcie-mediatek.c
> @@ -605,11 +605,11 @@ static irqreturn_t mtk_pcie_intr_handler(int irq, void *data)
>
> while ((status = readl(port->base + PCIE_INT_STATUS)) & INTX_MASK) {
> for_each_set_bit_from(bit, &status, PCI_NUM_INTX + INTX_SHIFT) {
> - /* Clear the INTx */
> - writel(1 << bit, port->base + PCIE_INT_STATUS);
> virq = irq_find_mapping(port->irq_domain,
> bit - INTX_SHIFT);
> generic_handle_irq(virq);
> + /* Clear the INTx */
> + writel(1 << bit, port->base + PCIE_INT_STATUS);
> }
> }
>
> @@ -619,10 +619,10 @@ static irqreturn_t mtk_pcie_intr_handler(int irq, void *data)
>
> while ((imsi_status = readl(port->base + PCIE_IMSI_STATUS))) {
> for_each_set_bit(bit, &imsi_status, MTK_MSI_IRQS_NUM) {
> - /* Clear the MSI */
> - writel(1 << bit, port->base + PCIE_IMSI_STATUS);
> virq = irq_find_mapping(port->msi_domain, bit);
> generic_handle_irq(virq);
> + /* Clear the MSI */
> + writel(1 << bit, port->base + PCIE_IMSI_STATUS);
> }
> }
> /* Clear MSI interrupt status */
> --
> 2.6.4
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

\
 
 \ /
  Last update: 2017-12-21 01:53    [W:0.096 / U:0.176 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site