lkml.org 
[lkml]   [2017]   [Dec]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH V2 9/9] ARM: dts: stm32: add initial support of stm32mp157c eval board
From
Date
Hi,

On 12/18/2017 09:20 PM, Arnd Bergmann wrote:
> On Mon, Dec 18, 2017 at 4:17 PM, Ludovic Barre <ludovic.Barre@st.com> wrote:
> =
>> +
>> +/ {
>> + model = "STMicroelectronics STM32MP157C eval daughter";
>> + compatible = "st,stm32mp157c-ed1", "st,stm32mp157";
>> +
>> + chosen {
>> + bootargs = "earlyprintk console=ttySTM3,115200 root=/dev/ram";
>> + stdout-path = "serial3:115200n8";
>> + };
>
> I'd remove the bootargs here and let the boot loader take care of
> that, in particular
> since all three arguments are rather old-school: earlycon is preferred over
> earlyprintk, console= should not be needed if you set stdout-path, and
> /dev/ram is obsoleted by initramfs.

In this case I will modify also stm32 mcu devicetree in this way.

Thanks
Alex


>
> Arnd
>

\
 
 \ /
  Last update: 2017-12-19 10:18    [W:0.070 / U:0.052 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site