lkml.org 
[lkml]   [2017]   [Dec]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [net-next: PATCH 0/8] Armada 7k/8k PP2 ACPI support
Hi Andrew,

2017-12-19 21:46 GMT+01:00 Andrew Lunn <andrew@lunn.ch>:
>> Of course! v2 will not have such problem, I've been waiting however
>> for the feedback about the ACPI representation. Anyway, I'm strongly
>> leaning towards using _ADR/_CID objects in PHY's nodes for ACPI, so
>> maybe I'll just issue the v2 in order to push the discussion a bit
>> forward.
>
> Hi Marcin
>
> I know ~0 about ACPI. But what seems to be missing for me is
> documentation. You are defining a ABI here, which all future MDIO
> busses, PHYs, and to some extent Ethernet switches need to follow. So
> i would expect this to be documented somewhere.

As the code derives straight from of_mdio.c, there is absolutely no
deviation from Documentation/devicetree/bindings/net/mdio.txt.

>
> How does documentation work in the ACPI world?
>

ACPI has its own specification, the newest one is 6.2
http://www.uefi.org/sites/default/files/resources/ACPI_6_2.pdf

It is pretty likely, that if we establish a generic solution for the
MDIO bus, a short section about it may probably require adding to
above - for now I see none.

Best regards,
Marcin

\
 
 \ /
  Last update: 2017-12-20 00:13    [W:0.194 / U:0.044 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site