lkml.org 
[lkml]   [2017]   [Dec]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH net-next v5 0/4] net: fec: fix refclk enable for SMSC LAN8710/20
From
From: Richard Leitner <dev@g0hl1n.net>
Date: Mon, 11 Dec 2017 13:16:56 +0100

> From: Richard Leitner <richard.leitner@skidata.com>
>
> This patch series fixes the use of the SMSC LAN8710/20 with a Freescale ETH
> when the refclk is generated by the FSL.
>
> This patchset depends on the "phylib: Add device reset GPIO support" patch
> submitted by Geert Uytterhoeven/Sergei Shtylyov, which was merged to
> net-next as commit bafbdd527d56 ("phylib: Add device reset GPIO support").
>
> Changes v5:
> - fix reset delay calculation (max_t instead of min_t)
>
> Changes v4:
> - simplify dts parsing
> - simplify reset delay evaluation and execution
> - fec: ensure to only reset once during fec_enet_open()
> - remove dependency notes from commit message
> - add reviews and acks
>
> Changes v3:
> - use phylib to hard-reset the PHY
> - implement reset delays in phylib
> - add new phylib API & flag (PHY_RST_AFTER_CLK_EN) to determine if
> a PHY is affected
>
> Changes v2:
> - simplify and fix fec_reset_phy function to support multiple calls
> - include: linux: phy: harmonize phy_id{,_mask} type
> - reset the phy instead of not turning the clock on and off
> (which would have caused a power consumption regression)

Series applied, thanks.

\
 
 \ /
  Last update: 2017-12-13 17:24    [W:0.174 / U:0.120 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site