lkml.org 
[lkml]   [2017]   [Dec]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v4 0/4] Teach phylib hard-resetting devices
On Mon, Dec 04, 2017 at 11:34:48AM +0100, Geert Uytterhoeven wrote:
> Hi David, Andrew, Florian, Simon, Magnus,
>
> This patch series adds optional PHY reset support to phylib.
>
> The first two patches are destined for David's net-next tree. They add
> core PHY reset code, and update a driver that currently uses its own
> reset code.
>
> The last two patches are destined for Simon's renesas tree. They add
> properties to describe the EthernetAVB PHY reset topology to the common
> Salvator-X/XS and ULCB DTS files, which solves two issues:
> 1. On Salvator-XS, the enable pin of the regulator providing PHY power
> is connected to PRESETn, and PSCI powers down the SoC during system
> suspend. Hence a PHY reset is needed to restore network
> functionality after system resume.
> 2. Linux should not rely on the boot loader having reset the PHY, but
> should reset the PHY during driver probe.

Thanks, I have applied patches 3/4 and 4/4 for v4.16.

\
 
 \ /
  Last update: 2017-12-11 08:05    [W:1.439 / U:0.308 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site