lkml.org 
[lkml]   [2017]   [Dec]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v5 07/10] clk: cosmetic changes to clk_summary debugfs entry
Date
clk_summary debugfs entry was already well over the traditional 80
characters per line limit but it grew even larger with the addition of
clock protection.

clock enable_cnt prepare_cnt protect_cnt rate accuracy phase
----------------------------------------------------------------------------------------------------
wifi32k 1 1 0 32768 0 0
vcpu 0 0 0 2016000000 0 0
xtal 5 5 0 24000000 0 0

This patch reduce the width a bit:
enable prepare protect
clock count count count rate accuracy phase
----------------------------------------------------------------------------------------
wifi32k 1 1 0 32768 0 0
vcpu 0 0 0 2016000000 0 0
xtal 5 5 0 24000000 0 0

Acked-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Quentin Schulz <quentin.schulz@free-electrons.com>
Tested-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Michael Turquette <mturquette@baylibre.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
drivers/clk/clk.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
index f69a2176cde1..f6fe5e5595ca 100644
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -2241,7 +2241,7 @@ static void clk_summary_show_one(struct seq_file *s, struct clk_core *c,
if (!c)
return;

- seq_printf(s, "%*s%-*s %11d %12d %12d %11lu %10lu %-3d\n",
+ seq_printf(s, "%*s%-*s %7d %8d %8d %11lu %10lu %-3d\n",
level * 3 + 1, "",
30 - level * 3, c->name,
c->enable_count, c->prepare_count, c->protect_count,
@@ -2268,8 +2268,9 @@ static int clk_summary_show(struct seq_file *s, void *data)
struct clk_core *c;
struct hlist_head **lists = (struct hlist_head **)s->private;

- seq_puts(s, " clock enable_cnt prepare_cnt protect_cnt rate accuracy phase\n");
- seq_puts(s, "----------------------------------------------------------------------------------------------------\n");
+ seq_puts(s, " enable prepare protect \n");
+ seq_puts(s, " clock count count count rate accuracy phase\n");
+ seq_puts(s, "----------------------------------------------------------------------------------------\n");

clk_prepare_lock();

--
2.14.3
\
 
 \ /
  Last update: 2017-12-01 22:53    [W:0.273 / U:1.012 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site