lkml.org 
[lkml]   [2017]   [Nov]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [RFC][PATCH] drm: adv7511/33: Fix adv7511_cec_init() failure handling
From
Date


On 11/29/2017 03:02 AM, John Stultz wrote:
> On Sun, Nov 26, 2017 at 4:56 AM, Archit Taneja <architt@codeaurora.org> wrote:
>>
>> On 11/17/2017 04:29 AM, John Stultz wrote:
>>> diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
>>> b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
>>> index 0e14f15..939c3b9 100644
>>> --- a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
>>> +++ b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
>>> @@ -1203,12 +1203,12 @@ static int adv7511_probe(struct i2c_client *i2c,
>>> const struct i2c_device_id *id)
>>> #ifdef CONFIG_DRM_I2C_ADV7511_CEC
>>> ret = adv7511_cec_init(dev, adv7511, offset);
>>> - if (ret)
>>> - goto err_unregister_cec;
>>> #else
>>> - regmap_write(adv7511->regmap, ADV7511_REG_CEC_CTRL + offset,
>>> - ADV7511_CEC_CTRL_POWER_DOWN);
>>> + ret = 1;
>>> #endif
>>> + if (ret)
>>> + regmap_write(adv7511->regmap, ADV7511_REG_CEC_CTRL +
>>> offset,
>>> + ADV7511_CEC_CTRL_POWER_DOWN);
>>
>>
>> This would force CEC to be powered off even if adv7511_cec_init() returned
>> 0, right?
>
> I don't think so. The initent was its only powered off if
> adv7511_cec_init returns an error or if CONFIG_DRM_I2C_ADV7511_CEC is
> not set.
>
>> Do we know why the call to adv7511_cec_init() is failing on the Hikey board?
>> If it's
>> because there isn't a "cec" clock specified in DT, it's not really a fatal
>> error, it
>> just means that the platform hasn't been set up to support CEC. In that
>
> Yea. I believe this is the case w/ HiKey. I don't have deeply
> detailed docs on the board so I'm not sure if we will be able to
> enable that or not (Xinliang/Guodong: Do you know if its possible?).
> In the meantime though, we shouldn't regress.
>
>> case, we
>> should just power down the CEC block. So, if adv7511_cec_init() would return
>> a
>> -ENOENT, which we could use as a hint to power down CEC. So, maybe something
>> like this?:
>>
>> #ifdef CONFIG_DRM_I2C_ADV7511_CEC
>> ret = adv7511_cec_init(dev, adv7511, offset);
>> if (ret && ret != -ENOENT)
>> goto err_unregister_cec;
>> #endif
>> if (ret)
>> regmap_write(adv7511->regmap, ADV7511_REG_CEC_CTRL + offset,
>> ADV7511_CEC_CTRL_POWER_DOWN);
>>
>> Apart from this, we should also move adv7511_cec_init() up in the probe so
>> that
>> it's called before the drm_bridge is registered.
>
> Hans has since reworked the patch w/ a new version. You might want to
> check his patches and see if they fit what your imagining.

Yes, I saw Hans's patch after I wrote to you. That patch looks perfect. I'll
queue that to the drm-misc repo once it's rebased on 4.15-rc1.

Thanks,
Archit

>
> thanks
> -john
>

--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project

\
 
 \ /
  Last update: 2017-11-29 06:06    [W:0.081 / U:0.064 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site