lkml.org 
[lkml]   [2017]   [Nov]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 3/4] i2c: mpc: fix PORDEVSR2 mask for MPC8533/44
Date
According to the reference manuals for the corresponding SoCs, SEC
frequency ratio configuration is indicated by bit 26 of the POR Device
Status Register 2. Consequently, SEC_CFG bit should be tested by mask 0x20,
not 0x80. Testing the wrong bit leads to selection of wrong I2C clock
prescaler on those SoCs.

Signed-off-by: Arseny Solokha <asolokha@kb.kras.ru>
---
drivers/i2c/busses/i2c-mpc.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c
index f47916466b82..8d60db0080f6 100644
--- a/drivers/i2c/busses/i2c-mpc.c
+++ b/drivers/i2c/busses/i2c-mpc.c
@@ -332,14 +332,18 @@ static u32 mpc_i2c_get_sec_cfg_8xxx(void)
if (prop) {
/*
* Map and check POR Device Status Register 2
- * (PORDEVSR2) at 0xE0014
+ * (PORDEVSR2) at 0xE0014. Note than while MPC8533
+ * and MPC8544 indicate SEC frequency ratio
+ * configuration as bit 26 in PORDEVSR2, other MPC8xxx
+ * parts may store it differently or may not have it
+ * at all.
*/
reg = ioremap(get_immrbase() + *prop + 0x14, 0x4);
if (!reg)
printk(KERN_ERR
"Error: couldn't map PORDEVSR2\n");
else
- val = in_be32(reg) & 0x00000080; /* sec-cfg */
+ val = in_be32(reg) & 0x00000020; /* sec-cfg */
iounmap(reg);
}
}
--
2.15.0
\
 
 \ /
  Last update: 2017-11-10 08:59    [W:1.845 / U:0.452 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site