lkml.org 
[lkml]   [2017]   [Nov]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/7] dt-bindings: Add Cavium Octeon Common Ethernet Interface.
Date
From: Carlos Munoz <cmunoz@cavium.com>

Add bindings for Common Ethernet Interface (BGX) block.

Signed-off-by: Carlos Munoz <cmunoz@cavium.com>
Signed-off-by: Steven J. Hill <Steven.Hill@cavium.com>
Signed-off-by: David Daney <david.daney@cavium.com>
---
.../devicetree/bindings/net/cavium-bgx.txt | 59 ++++++++++++++++++++++
1 file changed, 59 insertions(+)
create mode 100644 Documentation/devicetree/bindings/net/cavium-bgx.txt

diff --git a/Documentation/devicetree/bindings/net/cavium-bgx.txt b/Documentation/devicetree/bindings/net/cavium-bgx.txt
new file mode 100644
index 000000000000..9fb79f8bc17f
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/cavium-bgx.txt
@@ -0,0 +1,59 @@
+* Common Ethernet Interface (BGX) block
+
+Properties:
+
+- compatible: "cavium,octeon-7890-bgx": Compatibility with all cn7xxx SOCs.
+
+- reg: The base address of the BGX block.
+
+- #address-cells: Must be <1>.
+
+- #size-cells: Must be <0>. BGX addresses have no size component.
+
+Typically a BGX block has several children each representing an
+Ethernet interface.
+
+Example:
+
+ ethernet-mac-nexus@11800e0000000 {
+ compatible = "cavium,octeon-7890-bgx";
+ reg = <0x00011800 0xe0000000 0x00000000 0x01000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethernet-mac@0 {
+ ...
+ reg = <0>;
+ };
+ };
+
+
+* Ethernet Interface (BGX port) connects to PKI/PKO
+
+Properties:
+
+- compatible: "cavium,octeon-7890-bgx-port": Compatibility with all cn7xxx
+ SOCs.
+
+- reg: The index of the interface within the BGX block.
+
+- local-mac-address: Mac address for the interface.
+
+- phy-handle: phandle to the phy node connected to the interface.
+
+
+* Ethernet Interface (BGX port) connects to XCV
+
+
+Properties:
+
+- compatible: "cavium,octeon-7360-xcv": Compatibility with cn73xx SOCs.
+
+- reg: The index of the interface within the BGX block.
+
+- local-mac-address: Mac address for the interface.
+
+- phy-handle: phandle to the phy node connected to the interface.
+
+- cavium,rx-clk-delay-bypass: Set to <1> to bypass the rx clock delay setting.
+ Needed by the Micrel PHY.
--
2.13.6
\
 
 \ /
  Last update: 2017-11-02 01:39    [W:0.232 / U:0.168 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site