Messages in this thread Patch in this message | | | From | Maxime Ripard <> | Subject | [PATCH 17/20] ARM: dts: sun9i: optimus: Remove card detect pull-up | Date | Thu, 5 Oct 2017 12:49:52 +0200 |
| |
The board has an external pull-up on the card-detect signal, so there's no need to add another one.
This also removes a DTC warning.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> --- arch/arm/boot/dts/sun9i-a80-optimus.dts | 10 +--------- 1 file changed, 1 insertion(+), 9 deletions(-)
diff --git a/arch/arm/boot/dts/sun9i-a80-optimus.dts b/arch/arm/boot/dts/sun9i-a80-optimus.dts index 199777e1c5ea..ba62e814f4b8 100644 --- a/arch/arm/boot/dts/sun9i-a80-optimus.dts +++ b/arch/arm/boot/dts/sun9i-a80-optimus.dts @@ -122,7 +122,7 @@ &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins>, <&mmc0_cd_pin_optimus>; + pinctrl-0 = <&mmc0_pins>; vmmc-supply = <®_dcdc1>; bus-width = <4>; cd-gpios = <&pio 7 18 GPIO_ACTIVE_HIGH>; /* PH8 */ @@ -173,14 +173,6 @@ clocks = <&ac100_rtc 0>; }; -&pio { - mmc0_cd_pin_optimus: mmc0_cd_pin@0 { - pins = "PH18"; - function = "gpio_in"; - bias-pull-up; - }; -}; - &r_ir { status = "okay"; }; -- git-series 0.9.1
| |