lkml.org 
[lkml]   [2017]   [Oct]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH V9 13/15] mmc: block: Add CQE and blk-mq support
Date
> -----Original Message-----
> From: Bartlomiej Zolnierkiewicz [mailto:b.zolnierkie@samsung.com]
> Sent: Wednesday, October 4, 2017 12:40 PM
> To: Linus Walleij <linus.walleij@linaro.org>
> Cc: Hunter, Adrian <adrian.hunter@intel.com>; Ulf Hansson
> <ulf.hansson@linaro.org>; linux-mmc <linux-mmc@vger.kernel.org>; linux-
> block <linux-block@vger.kernel.org>; linux-kernel <linux-
> kernel@vger.kernel.org>; Bough Chen <haibo.chen@nxp.com>; Alex
> Lemberg <alex.lemberg@sandisk.com>; Nowak, Mateusz
> <mateusz.nowak@intel.com>; Yuliy Izrailov <Yuliy.Izrailov@sandisk.com>;
> Jaehoon Chung <jh80.chung@samsung.com>; Dong Aisheng
> <dongas86@gmail.com>; Das Asutosh <asutoshd@codeaurora.org>;
> Zhangfei Gao <zhangfei.gao@gmail.com>; Sahitya Tummala
> <stummala@codeaurora.org>; Harjani Ritesh <riteshh@codeaurora.org>;
> Venu Byravarasu <vbyravarasu@nvidia.com>; Shawn Lin <shawn.lin@rock-
> chips.com>; Christoph Hellwig <hch@lst.de>
> Subject: Re: [PATCH V9 13/15] mmc: block: Add CQE and blk-mq support
>
>
> Hi,
>
> On Wednesday, October 04, 2017 09:39:45 AM Linus Walleij wrote:
> > On Fri, Sep 22, 2017 at 2:37 PM, Adrian Hunter <adrian.hunter@intel.com>
> wrote:
> >
> > > Add CQE support to the block driver, including:
> > > - optionally using DCMD for flush requests
> > > - "manually" issuing discard requests
> > > - issuing read / write requests to the CQE
> > > - supporting block-layer timeouts
> > > - handling recovery
> > > - supporting re-tuning
> > >
> > > CQE offers 25% - 50% better random multi-threaded I/O. There is a
> > > slight (e.g. 2%) drop in sequential read speed but no observable
> > > change to sequential write.
> > >
> > > CQE automatically sends the commands to complete requests. However
> > > it only supports reads / writes and so-called "direct commands"
> > > (DCMD). Furthermore DCMD is limited to one command at a time, but
> discards require 3 commands.
> > > That makes issuing discards through CQE very awkward, but some CQE's
> > > don't support DCMD anyway. So for discards, the existing non-CQE
> > > approach is taken, where the mmc core code issues the 3 commands one
> at a time i.e.
> > > mmc_erase(). Where DCMD is used, is for issuing flushes.
> > >
> > > For host controllers without CQE support, blk-mq support is extended
> > > to synchronous reads/writes or, if the host supports
> > > CAP_WAIT_WHILE_BUSY, asynchonous reads/writes. The advantage of
> > > asynchronous reads/writes is that it allows the preparation of the
> > > next request while the current request is in progress.
> > >
> > > Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
> >
> > I am trying to wrap my head around this large patch. The size makes it
> > hard but I am doing my best.
>
> I also think that this patch should be split on two patches. The 1st one
> introducing blk-mq and the 2nd one adding CQE support.
>
> [ I don't agree that they make more sense together, on the contrary,
> it is very difficult to properly analyze blk-mq changes on their
> own while there are mixed with CQE related ones. ]

The CQE and non-CQE code paths are clearly marked. But maybe you
are asking what the code would look like if we *never* had to support CQE.
And my point is we *do* have to support CQE.

Do you have any questions about the code?

\
 
 \ /
  Last update: 2017-10-04 21:24    [W:0.110 / U:0.332 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site