lkml.org 
[lkml]   [2017]   [Oct]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 6/8] ARM: dts: aspeed-ast2500: Add I2C devices
From
Date
On Thu, 2017-09-28 at 17:21 +0930, Joel Stanley wrote:
> Enable the buses that are in use and the devices that are attached.
> Currently that includes temperature measurement and EEPROM.

> Signed-off-by: Joel Stanley <joel@jms.id.au>

Reviewed-by: Andrew Jeffery <andrew@aj.id.au>

> ---
>  arch/arm/boot/dts/aspeed-ast2500-evb.dts | 19 +++++++++++++++++++
>  1 file changed, 19 insertions(+)

> diff --git a/arch/arm/boot/dts/aspeed-ast2500-evb.dts b/arch/arm/boot/dts/aspeed-ast2500-evb.dts
> index 7c90dac99822..dc7d73b02b76 100644
> --- a/arch/arm/boot/dts/aspeed-ast2500-evb.dts
> +++ b/arch/arm/boot/dts/aspeed-ast2500-evb.dts
> @@ -59,3 +59,22 @@
>   pinctrl-names = "default";
>   pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
>  };
> +
> +&i2c3 {
> + status = "okay";
> +
> + eeprom@50 {
> + compatible = "atmel,24c08";
> + reg = <0x50>;
> + pagesize = <16>;
> + };
> +};
> +
> +&i2c7 {
> + status = "okay";
> +
> + lm75@4d {
> + compatible = "national,lm75";
> + reg = <0x4d>;
> + };
> +};[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2017-10-04 07:12    [W:0.141 / U:0.800 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site