lkml.org 
[lkml]   [2017]   [Oct]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 2/3] mailbox: Add support for Hi3660 mailbox
Hi Mark,

On Mon, Oct 30, 2017 at 10:19:40AM +0000, Mark Rutland wrote:
> Hi,
>
> On Mon, Oct 30, 2017 at 12:45:06PM +0800, Leo Yan wrote:
> > On Fri, Oct 27, 2017 at 11:46:00AM +0100, Mark Rutland wrote:
> > > On Fri, Oct 27, 2017 at 02:15:03PM +0800, Kaihua Zhong wrote:
> > > > +static int hi3660_mbox_check_state(struct mbox_chan *chan)
> > > > +{
>
> > > > + /* Ensure channel is released */
> > > > + writel_relaxed(0xffffffff, base + MBOX_IMASK_REG);
> > > > + writel_relaxed(BIT(mdev->ack_irq), base + MBOX_SRC_REG);
> > > > + __asm__ volatile ("sev");
> > > > + return 0;
> > > > +}
> > >
> > > Drivers really shouldn't be using SEV directly (even if via the
> > > sev() macro)...
> > >
> > > This SEV isn't ordered w.r.t. anything, and it's unclear what
> > > ordering you need, so this simply does not work.
> >
> > I will leave your questions for Hisilicon colleagues, essentially your
> > questions are related with mailbox mechanism.
> >
> > But I'd like to firstly get clear your question for "This SEV isn't
> > ordered w.r.t. anything". From my understanding, ARMv8 architecture
> > natually adds DMB before SEV so all previous register writing
> > opreations should be ensured to endpoint before SEV?
>
> This is not the case; SEV does not add any implicit memory barrier, and
> is not ordered w.r.t. memory accesses.
>
> See ARM DDI 0487B.b, page D1-1905, "The Send Event instructions":
>
> The PE is not required to guarantee the ordering of this event with
> respect to the completion of memory accesses by instructions before
> the SEV instruction. Therefore, ARM recommends that software
> includes a DSB instruction before any SEV instruction.

My fault and thanks for explanation.

> Note that a DMB is not sufficient, as SEV is not a memory access.

Understood now, so below code should be safe?

wmb(); -> dsb(st);
sev();

Thanks,
Leo Yan

\
 
 \ /
  Last update: 2017-10-30 12:14    [W:0.058 / U:0.680 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site