lkml.org 
[lkml]   [2017]   [Oct]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [RFC v4 15/17] [media] vb2: add infrastructure to support out-fences
Hi Gustavo,

Sorry for the sporadic review... I'm struggling to get time to look at
these.

On Fri, Oct 20, 2017 at 07:50:10PM -0200, Gustavo Padovan wrote:
>From: Gustavo Padovan <gustavo.padovan@collabora.com>
>
>Add vb2_setup_out_fence() and the needed members to struct vb2_buffer.
>
>v2: - change it to reflect fd_install at DQEVENT
> - add fence context for out-fences
>
>Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
>---
> drivers/media/v4l2-core/videobuf2-core.c | 31 +++++++++++++++++++++++++++++++
> include/media/videobuf2-core.h | 20 ++++++++++++++++++++
> 2 files changed, 51 insertions(+)
>
>diff --git a/drivers/media/v4l2-core/videobuf2-core.c b/drivers/media/v4l2-core/videobuf2-core.c
>index 78f369dba3e3..c7ba67bda5ac 100644
>--- a/drivers/media/v4l2-core/videobuf2-core.c
>+++ b/drivers/media/v4l2-core/videobuf2-core.c
>@@ -23,8 +23,11 @@
> #include <linux/sched.h>
> #include <linux/freezer.h>
> #include <linux/kthread.h>
>+#include <linux/sync_file.h>
>+#include <linux/dma-fence.h>
>
> #include <media/videobuf2-core.h>
>+#include <media/videobuf2-fence.h>
> #include <media/v4l2-mc.h>
>
> #include <trace/events/vb2.h>
>@@ -1316,6 +1319,34 @@ int vb2_core_prepare_buf(struct vb2_queue *q, unsigned int index, void *pb)
> }
> EXPORT_SYMBOL_GPL(vb2_core_prepare_buf);
>
>+int vb2_setup_out_fence(struct vb2_queue *q, unsigned int index)
>+{
>+ struct vb2_buffer *vb;
>+ struct dma_fence *fence;
>+
>+ vb = q->bufs[index];
>+
>+ vb->out_fence_fd = get_unused_fd_flags(O_CLOEXEC);
>+
>+ fence = vb2_fence_alloc(q->out_fence_context);
>+ if (!fence) {
>+ put_unused_fd(vb->out_fence_fd);
>+ return -ENOMEM;
>+ }
>+
>+ vb->sync_file = sync_file_create(fence);
>+ if (!vb->sync_file) {
>+ dma_fence_put(fence);
>+ put_unused_fd(vb->out_fence_fd);
>+ return -ENOMEM;
>+ }

sync_file_create() takes an extra reference of its own, so I think you
don't need the dma_fence_get() below, or you should drop a reference
before returning.

-Brian

>+
>+ vb->out_fence = dma_fence_get(fence);
>+
>+ return 0;
>+}
>+EXPORT_SYMBOL_GPL(vb2_setup_out_fence);
>+
> /**
> * vb2_start_streaming() - Attempt to start streaming.
> * @q: videobuf2 queue
>diff --git a/include/media/videobuf2-core.h b/include/media/videobuf2-core.h
>index 624ca2dce9ea..1925ede73804 100644
>--- a/include/media/videobuf2-core.h
>+++ b/include/media/videobuf2-core.h
>@@ -259,6 +259,10 @@ struct vb2_buffer {
> * using the buffer (queueing to the driver)
> * fence_cb: fence callback information
> * fence_cb_lock: protect callback signal/remove
>+ * out_fence_fd: the out_fence_fd to be shared with userspace.
>+ * out_fence: the out-fence associated with the buffer once
>+ * it is queued to the driver.
>+ * sync_file: the sync file to wrap the out fence
> */
> enum vb2_buffer_state state;
>
>@@ -269,6 +273,10 @@ struct vb2_buffer {
> struct dma_fence_cb fence_cb;
> spinlock_t fence_cb_lock;
>
>+ int out_fence_fd;
>+ struct dma_fence *out_fence;
>+ struct sync_file *sync_file;
>+
> #ifdef CONFIG_VIDEO_ADV_DEBUG
> /*
> * Counters for how often these buffer-related ops are
>@@ -518,6 +526,7 @@ struct vb2_buf_ops {
> * @ordered_in_vb2: set by the driver to tell vb2 te guarantee the order
> * of buffer queue from userspace with QBUF() until they are
> * queued to the driver.
>+ * @out_fence_context: the fence context for the out fences
> * @last_fence: last in-fence received. Used to keep ordering.
> * @fileio: file io emulator internal data, used only if emulator is active
> * @threadio: thread io internal data, used only if thread is active
>@@ -574,6 +583,7 @@ struct vb2_queue {
> unsigned int ordered_in_driver:1;
> unsigned int ordered_in_vb2:1;
>
>+ u64 out_fence_context;
> struct dma_fence *last_fence;
>
> struct vb2_fileio_data *fileio;
>@@ -745,6 +755,16 @@ int vb2_core_create_bufs(struct vb2_queue *q, enum vb2_memory memory,
> int vb2_core_prepare_buf(struct vb2_queue *q, unsigned int index, void *pb);
>
> /**
>+ * vb2_setup_out_fence() - setup new out-fence
>+ * @q: The vb2_queue where to setup it
>+ * @index: index of the buffer
>+ *
>+ * Setup the file descriptor, the fence and the sync_file for the next
>+ * buffer to be queued and add everything to the tail of the q->out_fence_list.
>+ */
>+int vb2_setup_out_fence(struct vb2_queue *q, unsigned int index);
>+
>+/**
> * vb2_core_qbuf() - Queue a buffer from userspace
> *
> * @q: videobuf2 queue
>--
>2.13.6
>

\
 
 \ /
  Last update: 2017-10-28 20:17    [W:0.386 / U:0.136 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site