lkml.org 
[lkml]   [2017]   [Oct]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 01/10 v3] usb: usb251xb: Update usb251xb bindings
On Sun, Oct 22, 2017 at 11:38:03PM +0300, Serge Semin wrote:
> Since hub usb2517 is going to be supported by the usb251xb driver,
> the bindings need to be properly updated. Particularly:
> - add "microchip,usb2517" and "microchip,usb2517i" compatible strings.
> - add "boolean" description to all the properties, which really accept
> a boolean value including a new one "led-{usb,speed}-mode".
> - move reset-gpios property to the optional section. It isn't
> defined as required in the code and shouldn't be required at all, since
> hardware may handle reset pins by itself.
> - add new led-{usb,speed}-mode mode property. USB2517 device supports
> two LED modes: USB mode and speed (default) indication mode. The last one
> can be switched on by this property.
> - add {bp,sp}-max-{total,removable}-current-microamp property measured in
> microamp. It hasn't been defined as property before. Since the limitation
> specified by these parameters is hardware specific it needs to be defined
> in dts.
>
> Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
> ---
> .../devicetree/bindings/usb/usb251xb.txt | 46 +++++++++++++++-------
> 1 file changed, 32 insertions(+), 14 deletions(-)

Acked-by: Rob Herring <robh@kernel.org>

\
 
 \ /
  Last update: 2017-10-28 20:15    [W:0.207 / U:0.612 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site