lkml.org 
[lkml]   [2017]   [Oct]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [RFC PATCH v2 1/3] regulator: bindings: Add properties for coupled regulators
From
Date


On 10/24/2017 08:58 PM, Rob Herring wrote:
> On Wed, Oct 18, 2017 at 02:47:00PM +0200, Maciej Purski wrote:
>> Some regulators require keeping their voltage spread below defined
>> max_spread.
>>
>> Add properties to provide information on regulators' coupling.
>>
>> Signed-off-by: Maciej Purski <m.purski@samsung.com>
>> ---
>> Documentation/devicetree/bindings/regulator/regulator.txt | 4 ++++
>> 1 file changed, 4 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/regulator/regulator.txt b/Documentation/devicetree/bindings/regulator/regulator.txt
>> index 378f6dc..6769565 100644
>> --- a/Documentation/devicetree/bindings/regulator/regulator.txt
>> +++ b/Documentation/devicetree/bindings/regulator/regulator.txt
>> @@ -60,6 +60,10 @@ Optional properties:
>> 0: Disable active discharge.
>> 1: Enable active discharge.
>> Absence of this property will leave configuration to default.
>> +- regulator-coupled-with: Phandle to regulators with which the regulator
>> + should be coupled. Allow up to 9 phandles.
>
> 9? Sounds like a driver detail and pretty arbitrary.
>
It's just a constant number that I defined as MAX_COUPLED, because in fact there
isn't any use-case yet for even more than two regulators so MAX_COUPLED equal to
9 is a really high number. If you find it cleaner, I can make this value variable.

> Is this linkage 2-way meaning 2 coupled regulators both have links to
> the other one? If so, then what happens when you have a high number? If
> not, how does one decide which regulator has this property?

Yes, it is 2-way. When you have a high number, then each regulator should have
phandles to every other. So, if you have 3 regulators coupled, then each one
should have 2 phandles.

>
>> +- regulator-coupled-max-spread: Max spread between voltages of coupled regulators
>> + in microvolts.
>>
>> Deprecated properties:
>> - regulator-compatible: If a regulator chip contains multiple
>> --
>> 2.7.4
>>
>
>
>

\
 
 \ /
  Last update: 2017-10-25 09:32    [W:3.094 / U:0.104 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site