Messages in this thread | | | Subject | Re: [PATCH v2] dwc: dra7xx: Print link state to console for debug | From | Faiz Abbas <> | Date | Wed, 25 Oct 2017 13:51:53 +0530 |
| |
Bjorn,
On Wednesday 25 October 2017 01:29 AM, Bjorn Helgaas wrote: > On Thu, Oct 19, 2017 at 06:13:29PM +0530, Faiz Abbas wrote: >> Enable support for printing the LTSSM link state for debugging PCI >> when link is down. >> >> Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> > > Applied with Kishon's ack to pci/host-dra7xx for v4.15, thanks! > > I tweaked the "link up" testing as follows (what I suggested before): > > > @@ -118,8 +157,18 @@ static int dra7xx_pcie_link_up(struct dw_pcie *pci) > { > struct dra7xx_pcie *dra7xx = to_dra7xx_pcie(pci); > u32 reg = dra7xx_pcie_readl(dra7xx, PCIECTRL_DRA7XX_CONF_PHY_CS); > + int link_up = !!(reg & LINK_UP); > + u32 cmd_reg; > + u32 ltssm_state; > + > + if (!link_up) { > + cmd_reg = dra7xx_pcie_readl(dra7xx, > + PCIECTRL_DRA7XX_CONF_DEVICE_CMD); > + ltssm_state = (cmd_reg & GENMASK(7, 2)) >> 2; > + dev_dbg(pci->dev, "Link state: %s\n", state[ltssm_state]); > + } > > - return !!(reg & LINK_UP); > + return link_up; > } > > static void dra7xx_pcie_stop_link(struct dw_pcie *pci) >
I wanted to send another version with David's suggestions included. Please don't merge.
Thanks, Faiz
| |